Switching On Your Device; Power Supply; Notes On Service And Coverage; Internet Access - Zte MF10 Quick Setup Manual

Switching on your device

1. Turn the power switch on to get started.
2. Wait 1~2 minutes after turning the router on before you use the service. The power
indicator should be lit on.

Power supply

For normal operation connect the router to the external power adapter. In case of power
failure or when there is no available external power supply, the router can not work.

Notes on Service and Coverage

If you cannot get service, make sure that :
You are in an area which has sufficient network coverage.
•
You are using the correct (U)S IM card.
•
If necessary you need enter your PIN or PUK code.
•
Please wait 1 - 2 minutes for the modem to initialize, attach to the network and obtain an IP
•
address.

Internet Access

The router does not require any drivers, and it supports all operating systems with Ether net
LAN capability, such as Windows 2000, XP, Vista, MAC OS X and Linux. The router
supports two computers surfing on internet using Ethernet cables at the same time, and also
supports Wireless LAN connection.

Preparation

Before using the data service, make sure:
The (U)SIM card is installed into the modem.
•
The modem is inserted into the router.
•
The Ethernet cable is connected properly.
•
The power light is on.
•
The PPP light is on.
•
Web browser requirement:
It is suggested that you use one of these web browsers to connect to the internet.