Bauer Hypermax Lithium 19115C-B Owner's Manual & Safety Instructions page 9

Forward and reverse trimming Wheel Setup
1. Turn the Trimmer upside down. Slide the
Wheel Assembly horizontally with wheels
facing forward onto the Metal Plate
located on the underside of the Guard.
Make sure the Wheel Assembly locks
onto the Plate – i t will click into place
when properly installed.
2. Remove the Wheel Assembly by
pushing in on the Tab and pulling
Wheels away from the Metal Plate.
Side to Side trimming Wheel Setup
1. Turn the Trimmer upside down.
Slide the Wheel Assembly vertically
with wheels facing sideways onto
the Metal Plate located on the
underside of the Guard. Make sure
the Wheel Assembly locks onto the
Plate – i t will click into place when
properly installed.
2. Remove the Wheel Assembly by
pushing in on the Tab and pulling
Wheels away from the Metal Plate.
Item 64995
Guard
For technical questions, please call 1-888-866-5797.
Wheel
assembly
Guard
Metal
plate
Figure c
Wheel assembly
Metal
plate
Figure D
tab
tab
Page 9