Download Print this page

Bauer Hypermax Lithium 19115C-B Owner's Manual & Safety Instructions page 4

12" string trimmer
Hide thumbs Also See for Hypermax Lithium 19115C-B:

Advertisement

Service
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
String trimmer Safety
1. use both hands when operating the String
trimmer. using one hand could cause loss of
control and result in serious personal injury.
2. Do not expose to rain.
3. Dress Properly. Do not wear loose clothing or
jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear
is recommended when working outdoors.
Wear protective hair covering to contain long hair.
4.
Wear ANSI-approved safety goggles and
heavy-duty work gloves. Use face or
dust mask if operation is dusty.
5. Do not leave the tool unattended when the
Battery Pack is connected. Turn off the tool,
and remove the Battery Pack before leaving.
6. Carefully inspect the spool housing and guard
before inserting Battery Pack in the Trimmer. Do
not use Trimmer if any part is cracked or damaged.
7. The Trigger and Safety Switch are important
safety devices. Do not disable or tie
down either Trigger or Safety Switch.
8. Do not use in rain, snow, sprinklers, or wet grass.
Do not rinse off the Trimmer.
9. Use only during daylight hours.
10. The spool will continue to rotate for a few seconds
after use. Allow it to stop completely and remove
Battery Pack before putting the tool down,
making any adjustments, or servicing the tool.
11. Do not overreach. Keep proper
footing and balance at all times.
12. Stay Alert. Watch what you are doing. Use common
sense. Do not operate tool when you are tired.
Page 4
For technical questions, please call 1-888-866-5797.
13. Avoid unintentional starting.
Prepare to begin work before turning on the tool.
14.
The battery Charger gets hot during use.
The Charger's heat can build up to
unsafe levels and create a fire hazard if it
does not receive adequate ventilation,
due to an electrical fault, or if it is used in a
hot environment.
Do not place the Charger on a flammable surface.
Do not obstruct any vents on the Charger.
Especially avoid placing the charger on carpets
and rugs; they are not only flammable, but they
also obstruct vents under the charger.
Place the Charger on a stable, solid, nonflammable
surface (such as a stable metal workbench or
concrete floor) at least 1 foot away from all
flammable objects, such as drapes or walls. Keep a
fire extinguisher and a smoke detector in the area.
Frequently monitor the Charger and
Battery Pack while charging.
15. This product is not a toy.
Keep it out of reach of children.
16. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
17. Maintain labels and nameplates on the
tool. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
18. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
Item 64995

Hide quick links:

Advertisement

loading