Advertisement
Wheel and hand rim 22" (accessory)
14
15
1
125 mm
2
The wheel and hand rim kit consists of wheel attachments (two pairs) with a QR axle
(one pair) and parking brakes with aluminium attachments (one pair) Tools required for
installation (not included in the kit): Allen key (4 mm) and an adjustable wrench (10").
Installation:
1. Install the attachments (both sides) as illustrated in figure 15. Note the distance
– 125 mm – shown in figure 15, item 1.
2. Attach the wheels by snapping them into place with the QR axles; see figure 16.
Check that the wheels have no sideways play.
3. Install the parking brakes on each side; see figure 17 (NOTE: right and left-hand versions).
Test the brakes so that the desired braking effect is achieved. Adjust brake position relative
to the wheel as necessary.
4. Tip-over protection is provided by the permanent rear wheels. Lock the rear wheels in the
direction of travel; see item 2, figure 15.
We provide a two-year warranty against any manufacturing defects (does not apply to
wear parts).
Bild från sidan med drivhjul och
broms monterad
16
17
7
Advertisement
