Advertisement
8
10
Sanitary pan
9
The sanitary pan is slid into position from behind
between the seat and wire guides as shown in
figure 8-9.
Make sure the sanitary pan is slid into position
above the wire guides. Also make sure that the
pan is in the right position in relation to the seat/
cut-out.
Fitting the back strap
Fasten the back-strap around
the rear frame – lock using the
side-release buckles. Adjust to
the desired position. Make sure
the cut-out for the armrest is
aligned with the cut-out in the
back-strap.
5
Advertisement
