Table of Contents
Advertisement
Figure 3-14 Power-On Password
3.2.3.1
Allows you to set the password for your system. When typing password, first
make user that Num Lock is off, then type your password in the entry fields
and press Enter. Confirm your password by typing it again and pressing
Enter. If the Enable Password to Power-on sub-item is enabled, the set
password is always required to boot the computer.
3.2.3.2
Sets if a warning message will appear when the hard disk boot sector
(partition table) has been changed. A check mark ( ) indicates enabled, while
an underline (_) indicates disabled. The default setting is disabled.
Figure 3-15 Hard Disk Boot Sector
CAUTION: sets this item to disabled before installing an operating system, running
Fdisk or Format program. Otherwise, the intended action will fail.
MIL-BOOK™
OPERATORS MANUAL
System Password
Hard Disk Boot Sector
- 3-9 -
Advertisement
Table of Contents
