1. Manuals
  2. Brands
  3. TAG Manuals
  4. Laptop
  5. MIL-BOOK 10 Series
  6. Operator's manual

TAG MIL-BOOK 10 Series Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MIL-BOOK 10 SERIES NOTEBOOK
OPERATOR' S MANUAL
22355 TAG Way, Dulles, VA 20166
Tel: (703) 406.3000 Fax: (703) 607.3853

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MIL-BOOK 10 Series and is the answer not in the manual?

Questions and answers

Related Manuals for TAG MIL-BOOK 10 Series

Summary of Contents for TAG MIL-BOOK 10 Series

  • Page 1 MIL-BOOK 10 SERIES NOTEBOOK OPERATOR’ S MANUAL 22355 TAG Way, Dulles, VA 20166 Tel: (703) 406.3000 Fax: (703) 607.3853...
  • Page 2 TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE Information in this manual is subject to change without notice.

  • Page 3: Getting Started

    CHAPTER Getting Started Congratulations on purchasing this Tablet PC. This hand-held computer, having no fan and being almost noiseless, is especially designed for the practical applications of warehouses, automobiles, vehicles, public security, repairing, assisting the handicapped, and other demanding situations where conventional notebook computers just cannot measure up.

  • Page 4: Getting The Computer Running

    Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: Tablet PC Accessories: − AC adapter (100~240 VAC, 50~60 Hz) −...

  • Page 5: Connecting To Ac Power

    Keep the shipping carton and packing materials in case you need to ship or store the computer in the future. Connecting to AC Power The computer operates either on the external AC power or internal battery power. It is suggested that you use AC power when you start up the computer for the first time.

  • Page 6: Positioning The Tablet Pc

    CAUTION: When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or the computer. When unplugging the connector, always hold the plug head. Never pull on the cord. NOTE: When the AC adapter is connected, it also charges the battery pack.
  • Page 7 upright position, pull open the stand located at the back as shown on the next figure. Place the wireless keyboard in front of the Tablet PC with no obstructions between them to allow unhampered communication between the computer and keyboard’s IR port. NOTE: It is recommended that the transmission distance must not exceed 3 meters ±...

  • Page 8: Turning On And Off The Computer

    Turning On and Off the Computer Turning On 1. Make sure the computer is connected to AC power. 2. Press the power button 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start.

  • Page 9: Taking A Look At The Computer

    Taking a Look at the Computer This section identifies the external components of the computer and briefly describes the function of each component. Right-Side Components Component Description See Also Reset Button Allows you to reset the system. P. 8-16 Connects a USB device, such as a USB floppy P.

  • Page 10: Left-Side Components

    Component Description See Also Audio Output Connects a set of headphones, external speakers P. 2-20 Connector with amplifier, or an audio recording device. Connects a serial device, such as a mouse. P. 4-6 Serial Port Expansion Port For connecting to: Port Replicator, P.

  • Page 11: Rear Components

    Component Description See Also X-Bay Interface Connects additional wireless LAN, wireless P. 4-2 modem (CDPD), external monitor, or 4 ports (COM1/4, IEEE 1394, and LAN). IR Port Connects an IrDA-compliant device for wireless P. 1-5, data transfer. RJ-11 Connects the telephone line. P.

  • Page 12: Front Components

    Front Components Component Description See Also Displays the output of the computer. Also serves P. 2-9 LCD Panel and Touchscreen as your Touchscreen. Power Button Turns the computer power ON and OFF. Also P. 1-6 serves as the SUSPEND/RESUME switch. Volume Allows you to toggle between adjusting the P.
  • Page 13 Component Description See Also Shows the speaker volume, or the LCD brightness level, or the primary/secondary battery capacity Suspend mode indicator (in reverse video) Hard disk drive in-use indicator Primary battery status indicator Secondary battery status indicator Volume adjust indicator LCD brightness adjust indicator Speaker The upper button provides you a quick way to...
  • Page 14 Bottom-Side Components Component Description See Also CCD USB Port Connects a standard USB CCD PC camera. P. 4-7 Allows you to turn on/off power coming from Internal Primary the internal primary battery. Battery Switch 1-12 Getting Started...

  • Page 15: Where To Go From Here

    Where to Go from Here As your computer is ready for operation, you may want to do any of the following now: For this purpose… Do this… To know more about the computer… Go on to the next chapter. To install the operating system if your See the operating system manual.
  • Page 16 CHAPTER Operating Your Tablet PC This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user but are new to Tablet PCs, you may choose to read only the parts containing information unique to your computer.

  • Page 17: Starting And Stopping The Computer

    Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button A computer starts up with an operating system (OS) existing on the storage device such as the hard disk;...
  • Page 18 If you choose to stop in Standby or Suspend mode, you can return to where you left off the next time you start up the computer. (See “Power Management” in Chapter 3 for more information.) Operating Your Tablet PC...
  • Page 19 Using the Wireless Keyboard (option) Before using the wireless keyboard, see section on “Positioning the Tablet PC and Wireless Keyboard” on chapter 1. Your wireless keyboard has all the standard functions of a full-sized computer keyboard. The standard functions of the keyboard can be further divided into five major categories: Mouse-control buttons Typewriter keys...

  • Page 20: Typewriter Keys

    Typewriter Keys Typewriter keys are similar to the keys on a typewriter. Several keys are added such as the Ctrl , and lock keys for special purposes. The Control key is normally used in combination with other keys for program-specific functions. The Alternate key is normally used in combination with other keys for program-specific functions.

  • Page 21: Numeric Keypad

    Numeric Keypad A 15-key numeric keypad is embedded in the typewriter keys as shown next: Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTE: When the numeric keypad is activated and you need to type the English letter in the keypad area, you can turn Num Lock off.

  • Page 22: Windows Keys

    Windows Keys The keyboard has two keys that perform Windows-specific functions: Windows Logo key and Application key. Windows Logo key opens the Start menu and performs software-specific functions when used in combination with other keys. Application key usually has the same effect as a right mouse click.

  • Page 23: Using The Touchscreen

    Using the Touchscreen CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the Touchscreen. Doing so may damage the Touchscreen surface. Use the included Touchscreen pen instead, which can be stretched for better grip and handling. The Touchscreen is a touch-sensitive device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.

  • Page 24: Configuring The Touchscreen

    Term Action Point Move your finger or pen on the Touchscreen until the cursor points to the selection on the screen. Click Tap gently anywhere on the Touchscreen. Double-click Tap twice on the Touchscreen rapidly. Drag and Press lightly on the Touchscreen and move your finger or drop pen until you reach your destination (drag).

  • Page 25: Connecting The Floppy Disk Drive

    Using the Floppy Disk Drive (option) Your Tablet PC comes with an USB floppy disk drive as drive A through the USB port on the right side, or port replicator on an optional expansion box, or through the USB port located on the plug of an optional CD-ROM drive module.
  • Page 26 Through the Expansion Port Plug of the CD-ROM Drive Module – Insert the USB plug of floppy disk drive into the USB port located on the expansion port plug of the CD-ROM drive module. Operating Your Tablet PC 2-11...

  • Page 27: Inserting And Ejecting Floppy Disks

    Inserting and Ejecting Floppy Disks To insert a floppy disk, hold it with the arrow facing up and towards the drive. Slide the disk into the drive until it clicks into place. To eject a floppy disk, first ensure that the floppy disk drive in-use indicator is off, and then press the eject button on the drive.

  • Page 28: Using The Hard Disk Drive

    Using the Hard Disk Drive Your computer comes with a hard disk drive as drive C. A hard disk drive is a storage device with non-removable, rotating, magnetic storage platters inside it. It is where your operating system and application software programs are stored. Your hard disk drive is a 2.5-inch IDE (Integrated Drive Electronics) hard disk drive.
  • Page 29 Using the CD/DVD Drive (option) Depending on the model, your computer comes with a CD-ROM drive or DVD-ROM drive module. This drive is usually configured as drive D and is connected to the expansion port located on the right side of the Tablet The drive uses removable 5.25-inch silver CD-ROM discs, which look like standard music CDs.

  • Page 30: Inserting And Removing A Cd

    Inserting and Removing a CD Follow this procedure to insert or remove a CD. 1. Turn on the computer. 2. Press the eject button and the CD tray will slide out partially. Gently pull on it until it is fully extended. 3.
  • Page 31 NOTE: In the unlikely event that you are unable to release the CD tray by pressing the eject button, you can manually release the CD. (See “CD/DVD Drive Problems” in Chapter 8.) 2-16 Operating Your Tablet PC...

  • Page 32: Using The Video Features

    Using the Video Features The video subsystem of your computer features: 10.4-inch TFT (Thin-Film Transistor) 18-bit color LCD display with 1024x768 XVGA (Extended Video Graphics Array) resolution. Simultaneous display on LCD and external monitor, which is useful when you have a presentation as you can control the screen from your computer and face the audience at the same time.
  • Page 33 Simultaneous Display Mode LCD Only CRT Only Display Resolution Colors √ √ √ 640x480 8-bit 16-bit √ √ √ 24-bit √ √ √ √ √ √ 32-bit √ √ √ 720x480 8-bit 16-bit √ √ √ 24-bit √ √ √ 32-bit √...
  • Page 34 Simultaneous Display Mode LCD Only CRT Only Display 1280x1024 8-bit √ 16-bit √ √ 24-bit √ 1600x1200 8-bit 16-bit √ TABLE NOTE: 8-bit = 256 colors; 16-bit = High Color or 65,536 (64 K) colors; 24 and 32-bit = True Color 16,770,000 (16 M) colors. Operating Your Tablet PC 2-19...

  • Page 35: Using The Audio Features

    Using the Audio Features NOTE: To take advantage of the enhanced audio capabilities, the audio driver supplied with your computer must be installed. If you experience interference while recording, try lowering the microphone recording volume. The audio subsystem of your computer features: Digital audio and analog mixing functions required for recording and playing sound on your computer SoundBlaster Pro, Adlib, and Microsoft Windows Sound System...

  • Page 36: Connecting Audio Devices

    Ways of playing and recording sound vary with the operating system used. See your operating system documentation or online help for specific information. Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. Microphone Connector ( ) can be connected to an external microphone for recording voice or sound.

  • Page 37: Using The Communication Features

    Using the Communication Features Using the Modem NOTE: To take advantage of the modem feature, the modem driver supplied with your computer must be installed. The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board.
  • Page 38 NOTE: When using communication software, you may have to disable power management. Set the COM port of the modem to COM2. Set parameters such as modem speed (baud rate) and line type (pulse dialing or tone dialing). Do not enter Standby when using communication software. Operating Your Tablet PC 2-23...

  • Page 39: Managing Power

    CHAPTER Managing Power Your computer operates either on external AC power, car adapter, or internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way. The topics in this chapter include: What is an AC or car adapter How to charge the battery pack...

  • Page 40: Ac And Car Adapter

    AC and Car Adapter CAUTION: The AC and car adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer.

  • Page 41: Battery Pack

    Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC or car adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time.

  • Page 42: Initializing The Battery Pack

    Initializing the Battery Pack You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging.
  • Page 43 By Gas Gauge The internal primary battery pack does not support the gas gauge display on the battery itself, but on the exterior side of the secondary battery pack (option) is a gas gauge for displaying the estimated battery charge. When the secondary battery pack is not installed in the Tablet PC and you want to know the battery charge, you can press the on/off switch with a pointed device to see the corresponding value of indicator segment that light...

  • Page 44: Battery Low Signals And Actions

    4. Slide the release lever ( ) to the right and pull the battery pack out of its compartment ( ) by using your thumb and index finger. 5. Insert the new battery pack into the compartment and slide the release lever first to the right to accommodate it, then releasing it to the lock position.
  • Page 45 If you do not take any action and after two minutes’ of warning beeps, the computer will automatically suspend-to-disk and turn off. CAUTION: If the “Battery Low Warning Beep” item is disabled in the Setup Configuration Utility (SCU) program, the computer will not beep. If you are using a flash PC Card, do not access the card during battery low periods.

  • Page 46: Power Management

    Power Management Your computer supports APM (Advanced Power Management) and ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows 98 and Windows 2000, power supply to different computer components is controlled on an as-needed basis.

  • Page 47: Manual Power Management

    Manual Power Management You can manually initiate Suspend-to-disk mode at any time in one of two ways: Use the O/S that supports the Suspend function. Press down the power button and release it in less than 4 seconds with the system on. Repeat the action to wake up the system under Suspend mode.
  • Page 48 Power-Saving Tips In addition to your computer’s automatic power management, you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. Disable the parallel and serial ports if no devices are connected to these ports.

  • Page 49: Expanding Your Computer

    CHAPTER Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. This chapter gives guidelines on installing and using these devices: Serial device IR device USB device...

  • Page 50: Connecting A Serial Device

    Connecting a Serial Device Your computer has a serial port for connecting a serial device such as a serial mouse or modem. Follow this procedure to connect a serial device: 1. Make sure the “COM1 Port” item is set properly in the SCU program. (See “Advanced Menu”...

  • Page 51: Connecting A Usb Device

    Connecting a USB Device Your computer has one USB port on the right side for connecting USB devices such as digital camera, scanner, printer, modem, or mouse; and one CCD USB port at the bottom-side for connecting an optional CCD camera.
  • Page 52 Expanding Your Computer...

  • Page 53: Connecting An Ir Device

    Connecting an IR Device Your computer has an IR (infrared) port for connecting an infrared- equipped device wirelessly such as a wireless keyboard/mouse, another computer, printer, or PDA (Personal Digital Assistant). The infrared feature supports these standards: For the front panel’s IR port IR keyboard/mouse that supports Forward FK34PUS002 (US language) specification For the left side’s IR port...
  • Page 54 When using the left side’s IR port: Place the transmitting device where its IR port faces the IR port of your computer within the effective range − within ±20-degrees vertical angle and within ±20-degrees horizontal angle at no greater than 0.8~1.0 meter distance. Place the receiving device where the IR port of the Tablet PC faces its IR port within the effective range −...

  • Page 55: Using Pc Cards

    Using PC Cards Your computer has one PC Card slot to accommodate one type II card. ZV Port and CardBus Support Your computer’s PC Card slot supports CardBus and ZV (Zoomed-Video) Port specifications. CardBus is the 32-bit version of PC Card technology.
  • Page 56 3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instruction to complete the process. To remove a PC Card: 1. Your operating system may require you to stop the PC Card before you actually remove it.

  • Page 57: System Memory Upgrade

    System Memory Upgrade You can upgrade your computer by changing system memory to a maximum of 128 MB on the SO-DIMM slot. However, to avoid damage during the installation procedure, please ask your dealer for help. Expanding Your Computer...

  • Page 58: Setup Configuration Utility (Scu)

    CHAPTER Setup Configuration Utility (SCU) SCU is a program for configuring the BIOS (Base Input/Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand.

  • Page 59: When And How To Use The Scu Program

    When and How to Use the SCU Program When to Use You need to run the SCU program when: You see an error message on the screen requesting you to run SETUP. You want to restore the factory default settings. You want to modify some specific settings according to the hardware.
  • Page 60 The menu can be divided into four areas: On the top line is the menu bar containing the titles of the available menus. Each menu title brings a specific menu. The center left column of the menu contains items that you can set for the selected menu title.

  • Page 61: Moving Around And Making Selections

    Moving Around and Making Selections A brief description of keyboard (if installed) usage is listed next: Function ←, → Selects a menu title. ↑, ↓ Selects an item or option. Enter 1) Brings up the sub-menu when an item with the arrow sign is selected.

  • Page 62: Main Menu

    Main Menu The Main menu contains the basic configuration settings of the system. Date and Time Sets the system time (Hour, Minute, Second) and date (Month, Day, Year). Setup Configuration Utility (SCU)

  • Page 63: Fast Boot

    IDE Settings Sets the type of hard disk drive installed in your system. Fast Boot When enabled, speeds up the booting procedure by bypassing the memory test. A check mark indicates enabled, while underline indicates disabled. Setup Configuration Utility (SCU)

  • Page 64: Boot Sequence

    Boot Sequence Sets the first, second, and third boot device. The system will try to boot from the first device but if it is not available, will try the next boot device. Display Mode Sets the display output device. Setup Configuration Utility (SCU)

  • Page 65: Advanced Menu

    Advanced Menu The Advanced menu contains the input/output configuration settings of the system. COM Port (COM1/2) Setup Configuration Utility (SCU)
  • Page 66 Allows you to assign COM1 and COM2 to specific functions that you wish to use. In general, COM1 can be assigned to RS-232C (serial port) while COM2 can be assigned to IR (infrared). Select Disabled if you need the resources (3F8/IRQ4 of COM1 and 2F8/IRQ3 of COM2) for other devices.

  • Page 67: Lpt Port

    Ir Mode Sets the communication compatibility mode for the IR port. Select according to the type of device with which the Tablet PC is to communicate with. LPT Port Sets the address for the LPT port (parallel port). 5-10 Setup Configuration Utility (SCU)
  • Page 68 LPT Extended Mode Sets the LPT port (parallel port) mode supported by the parallel device you are using. Your system supports EPP (Enhanced Parallel Port) and ECP (Extended Capabilities Port) standards that turn the standard parallel port into a high-speed bi-directional peripheral port. SaveToDisk Warning Message Setup Configuration Utility (SCU) 5-11...

  • Page 69: Keyboard Numlock

    Sets if a warning message will appear after system power on when there is no Suspend-to-disk partition on the hard disk. A check mark indicates enabled, while underline indicates disabled. Keyboard Numlock Sets if the numeric keypad will function. A check mark indicates enabled, while underline indicates disabled.

  • Page 70: Resolution Expansion

    Enables or disables the cache memory of your system: L1 cache (CPU internal cache) and L2 cache (external cache). Cache memory enhances system performance because the most frequently used data is accessed from and written to the high-speed cache memory. For stable system performance, you are not advised to change the default settings.
  • Page 71 Function Key 1 Define (FN1) Function Key 2 Define (FN2) Function Key 3 Define (FN3) These 3 items allow user to define the corresponding function key associated with the 3 function buttons ( ) found on the front panel. 5-14 Setup Configuration Utility (SCU)

  • Page 72: Security Menu

    Security Menu The Security menu contains the security setting that safeguards your system against unauthorized use. System Password Setup Configuration Utility (SCU) 5-15...
  • Page 73 Sets the system password. A password is required for starting up the system and running the SCU program. When setting password, make sure that NumLock is off, then type the password in the entry field and press . Confirm your password by typing it again and pressing .
  • Page 74 Virus Alert Gives a warning message when the hard disk boot sector (partition table) is about to be changed. A check mark indicates enabled, while underline indicates disabled. BootSector Protect Helps prevent infection of computer viruses by protecting the hard disk boot sector (partition table) from changes.

  • Page 75: Power Menu

    Power Menu The Power menu contains the power management settings that help save system power. Enable Power Management Serves as the master control for the power management feature. A check mark indicates enabled, while underline indicates disabled. Max Performance Balanced Power Saving Max Power Saving Customize You can only select one of them.
  • Page 76 Balanced Allows moderate system performance and Power Saving moderate battery life. Max Power Allows the longest battery life but minimum Saving system performance. NOTE: The predefined settings of the aforementioned options are viewed in the next item. Customize NOTE: All items except Battery Low Warning Beep do not work in ACPI-compliant operating systems such as Windows 98, Windows Me, and Windows 2000.
  • Page 77 Suspend After sets the time period of inactivity before entering Suspend mode. It works in tandem with the previous item Standby After. After the system enters Standby mode, it will start the timeout period before system enters Suspend mode. What happens next upon entering Suspend mode is determined by the next item Suspend Data Suspend Data to allows you to choose between suspending data to RAM or to disk.
  • Page 78 Intel® SpeedStep™ Tech. This item is only available if the CPU you are using supports the Intel® SpeedStep™ function. You can only select one of them. Automatic Allows maximum CPU performance when using AC/car power but minimum CPU performance when using battery power. Allows maximum CPU performance regardless of Maximum power source.

  • Page 79: Exit Menu

    Exit Menu The Exit menu allows you to leave the SCU program. After finished with your settings, you must save and exit so that the new settings can take effect. Save Changes and Exit saves the changes you have made and exit the SCU program.

  • Page 80: Installing Software Drivers

    CHAPTER Installing Software Drivers To take full advantage of the unique features of your Tablet PC, some operating systems require custom software, known as drivers, to be installed. If you purchased the Tablet PC with Windows pre-installed, your dealer may have already installed the drivers. If not, you need to install the drivers using the CD supplied with your Tablet PC.

  • Page 81: How To Use The Cd

    How to Use the CD NOTE: • The drivers may have been updated after this manual was published. For drivers upgrade, please contact your dealer. • You can always find README or document files on the CD. These files contain the latest information from the software supplier. Please read the files together with this chapter.
  • Page 82 Power Profile driver NOTE: If you are using Windows 98 or Windows 2000, you will not need to install this driver. Please refer to the Readme file on the CD for the installation instructions. Installing Software Drivers...
  • Page 83 Other Drivers and Utilities 0VMAKFIL Utility CAUTION: Check with your dealer to find out if the Suspend-to-disk file (partition) is already created. If it is not created and you want to create the Suspend-to-disk file by yourself, make sure that your hard disk is empty. That is, your hard disk has not been partitioned by the FDISK program.
  • Page 84 CHAPTER Caring for the Tablet PC Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering these areas of maintenance: How to protect the computer What to note when using and storing the computer How to clean the computer What to note when using the battery pack...

  • Page 85: Protecting The Computer

    Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using the Password The power-on password protects your computer against unauthorized use.

  • Page 86: Taking Care Of The Tablet Pc

    Taking Care of the Tablet PC Location Guidelines Use the computer where the temperature is between 10°C (50°F) and 35°C (95°F). Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust.

  • Page 87: Cleaning Guidelines

    Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display.

  • Page 88: When Traveling

    When Traveling Before traveling with your computer, make a backup of your hard disk data into floppy disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure the battery pack is fully charged. Make sure the computer is turned off.

  • Page 89: Troubleshooting

    CHAPTER Troubleshooting Hardware, software, or a combination of both can cause computer problems. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.

  • Page 90: Preliminary Checklist

    Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the computer.

  • Page 91: Solving Common Problems

    Solving Common Problems For easy reference, the problems are divided into these categories. Problem Type Go to Battery problems P. 8-4 CD/DVD drive problems P. 8-4 Display problems P. 8-5 Floppy disk drive problems P. 8-7 Hardware device problems P. 8-8 Hard disk drive problems P.

  • Page 92: Battery Problems

    Battery Problems The battery does not charge (Battery Charge indicator does not appear). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot – gets above 40 C (104 F) or too cold – below 0 C (32 F).

  • Page 93: Display Problems

    Make sure that the CD is not dirty. Clean the CD with a CD cleaning kit, available in most computer stores. Make sure that the CD/DVD drive driver is installed correctly. Make sure that the computer supports the CD or the file format contained.
  • Page 94 Try turning the computer off, wait a few seconds, then turn it back The characters on the screen are dim. Adjust the brightness. Bad dots appear on the display at all times. A small number of missing, discolored, or bright dots on the screen are an intrinsic characteristic of TFT LCD technology.

  • Page 95: Floppy Disk Drive Problems

    Simultaneous display does not work. Make sure that you turn on the external monitor before turning on the computer. Check the Setup item Display Mode on the Main menu of the SCU program is configured correctly. Floppy Disk Drive Problems The Floppy Disk Drive In-use Indicator stays on.

  • Page 96: Hard Disk Drive Problems

    Make sure if the device needs any jumper or switch settings. (Refer to the documentation that came with the device.) Check the cables or power cords for correct connections. For an external device that has its own power switch, make sure that the power is turned on.

  • Page 97: Keyboard And Mouse Problems

    If you are using any file transfer functions, make sure that both the computer and the IR device have the appropriate software running. Make sure that there is no device radiating infrared rays, such as remote-controlled devices or wireless headphones, near the computer or device.

  • Page 98: Lan Problems

    LAN Problems I cannot access the network. Make sure that the LAN driver is correctly installed. Make sure that the LAN cable is properly connected to the RJ-45 connector and the network hub. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct.

  • Page 99: Printer Problems

    The PC Card stops communicating properly. The application may have been reset when the computer is turned off or in Standby mode. Exit and restart the application. Power Management Problems (for Windows) The computer does not enter Standby or Suspend mode automatically.

  • Page 100: Software Problems

    Make sure that the printer’s signal cable is properly connected. Make sure that the printer driver is correctly installed. Make sure that you have assigned the printer port correctly in your operating system or application program. Make sure that the printer port is enabled in the SCU program. The printer prints garbled information.

  • Page 101: Startup Problems

    The sound system does not record. Adjust the playback or recording sound levels. The external microphone or audio device does not work. Make sure that the microphone is connected to the proper connector on the computer. Make sure that your computer is equipped with the driver needed. Click the speaker symbol on the taskbar and check the Windows volume control.

  • Page 102: Other Problems

    The message “Invalid system disk” or “Disk error” appears on the screen after you turn on the computer. If you are deliberately trying to boot from a floppy disk, replace the disk with a bootable one and press any key to continue booting. If you are booting from the hard disk, make sure that there is no floppy disk in the floppy disk drive.

  • Page 103: Resetting The Computer

    Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the system operation seems to hang up, first wait. It is possible that the system is processing data.

  • Page 104: Specifications

    APPENDIX Specifications NOTE: Specifications are subject to change without any prior notices. Parts Specifications Pentium III / Celeron series microprocessors, µPGA2 or BGA2 package Cache Memory 128 KB on-die (integrated with Celeron CPU) 256 KB on-die (integrated with Pentium III CPU) ROM BIOS 256 KB Flash EEPROM System...
  • Page 105 Parts Specifications I/O ports On front panel IR port for wireless keyboard/mouse On left side HP-SIR port, RJ-11 fax/modem port On right side Serial port, Mic-in, Line-out On underside CCD port (USB-type) X-Bay interface IEEE 1394, serial ports, RJ-45 (option) Expansion port USB port (supports USB FDD boot-up function), serial port, ECP/EPP (option)

Table of Contents