Keyboard Touchpad; Additional Keyboard Functions; Volume Control; Figure 1-6 Cursor Control Keys - TAG MIL-BOOK 1000 Series Operator's Manual

Tag laptop user manual

Table of Contents

1.5.3.3

The built-in touchpad is a convenient substitute for a mouse device. It's

function is similar to that of a two-button mouse. The left button is equivalent

to the left button on a mouse and the right button is equivalent to the right

button on a mouse. The touchpad is capacitive, and needs to be in contact with

your skin to operate.

• To move the cursor: Place your thumb or finger on the surface of the

touchpad and move it in the direction you with the cursor to go.

• To Click: Press the touchpad's left or right button or lightly tap on the

touchpad.

• To double click: Either press the button twice or lightly tap the touchpad

twice in quick succession.

• There are two ways to drag:

Move the cursor to the desired location, the press down the left button. While

still holding down the left button, move the cursor to the desired location.

Then, release the button. Move the cursor to the desired location. Quickly tap

the touchpad as if you were double clicking however, do not move your finger

after the second tap. While maintaining contact with the touchpad, move the

pointer to the desired location. Lift your finger to complete the move.

The MIL-BOOK 1000 offers "Hot Key" commands that provide easy access to

system features. The use of the "Fn" key along with several specific keys (F1-

F12) controls various functions of the MIL-BOOK 1000.

1.5.4.1

The volume control is adjusted by use of a combination of function keys. To

increase the volume, press the Fn+F4 keys. To decrease the volume, press the

MIL-BOOK™

OPERATORS MANUAL

Keyboard Touchpad

- 1-9 -

Table of Contents