Advertisement
5. Once the driver is installed, power on the REX DAC.
6. Connect your USB cable between REX DAC and your PC.
7. The computer will take a moment to enumerate or identify the REX DAC on its USB bus
and will notify you when it is installed successfully.
8. Confirm the driver installation in device manager, where it will show up as:
AKDesign USB Audio under the Sound, Video and Game Controllers tab.
Note that the device will not be listed in the Sound Control panel.
9. Configure your playback software to receive and send audio data from and to the ASIO
interface. Depending on your software this may be identified as "AKDesign USB ASIO" or
simply as ASIO.
Configuration Examples
Foobar2000 example
1.1. Open the Foobar2000 webpage at
http://www.foobar2000.org/download
to download the following:
Foobar2000 v1.3.17.exe
foo_out_asio.fbk-component
You'll find these by scrolling down the webpage to Get add-on foobar2000 components.
Click on this and scroll down to ASIO support 2.1.2.
1.2. Double click on the foobar2000_v1.3.17.exe. Click Run, Accept terms and
conditions, and follow the default installation instructions on your screen.
After installation is complete foobar2000 will open on your screen. Close it.
Advertisement
