Advertisement
1.3. Double click on foo_out_asio.fbk-component Click Yes on the warning sign and
foobar2000 will pop up. Click Yes when the restart message pops up.
1.4. Turn on the REX DAC. Select the USB input and plug the DAC into the USB port of
your computer. Windows will show a message in the right bottom corner of your display that
device is being configured.
1.5. Open Foobar2000 and go to Library - Configure - ASIO.
In ASIO drivers window (see picture bellow) Select AKDesign and click OK.
(If AKDesign driver is not listed run akdesigndrv-2.0.exe one more time.)
Done
JRiver Media Center example
2.1. Open webpage
www.jriver.com/download.html
and choosethe appropriate download
for the operating system on your computer.
Note: JRiver Media Center is licensed software. In order to install the license has to be
purchased.
2.2. Install software following the prompts from Jriver on your display.
Advertisement
