Advertisement

Quick Links

INSTRUCTION BOOK
T H M T I B I A
THM Tibia en 300517-01
t h m . b i k e

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TIBIA and is the answer not in the manual?

Questions and answers

Summary of Contents for THM TIBIA

  • Page 1 INSTRUCTION BOOK T H M T I B I A THM Tibia en 300517-01 t h m . b i k e...
  • Page 2: Table Of Contents

    LOREM IPSUM LOREM IPSUM CONTENT INTRODUCTION Please bear in mind that your THM component is a lightweight construction manufactured Preface..............4 from carbon – take this into account for assembly/maintenance work and when handling the product and proceed with caution! SAFETY Intended use .............5...
  • Page 3: Introduction

    The THM stem is approved for a total weight (bike+rider+luggage) up to 110 kg (242 lbs.) and can the manuals of other manufacturers whose products are used on your bicycle (Fork, headset, be used on road bikes.
  • Page 4: On The Road

    - If you are involved in a heavy fall you should not continue to ride your bicycle. If such a case occurs, send us your THM components for inspection, even if no external damage is visible. In your own interest you should treat all of the components on your bicycle which have been produced by other manufacturers in the same manner.
  • Page 5: Dimensions

    ** Total weight = rider + bicycle + luggage WARNING Tightening Torques The THM Tibia stem has to be mounted with carbon assembly paste. WARNING Risk of accident caused by a malfunctioning stem system due to loose screw connections. - Check the required tightening torque of all screw connections after the first 100 km –...
  • Page 6: Installation Of The Handlebar

    ASSEMBLY ASSEMBLY INSTALLATION OF THE HANDLEBAR Install the stem on the steer tube until it audibly 1– 3 mm, min. – max. ! contacts the top spacer or the steer bearing. Slacken the clamping screws which fix the handlebar to Make sure that an overlap of 1mm to max.
  • Page 7: Maintenance

    MAINTENANCE Important maintenance information DISPOSAL If THM components are defective or no longer in use, you can dispose of them with your non- WARNING recyclable waste or domestic refuse, or ask a local waste disposal company for other disposal methods (e.g. recycling).
  • Page 8: Regular Maintenance

    Ask your specialist dealer about appropriate Liability shall expire if repair work or any other work on the THM product has been conducted by lubricants and cleaning agents as well as information relating to their correct application.
  • Page 9 Reproduction or translation of this publication, in whole or in part, is not permitted without the written consent of the company THM Faserverbund-Technologie GmbH. All rights under the provisions of the copyright act are reserved.
  • Page 10 THM Faserverbund-Technologie GmbH Am Sportplatz 3 D-24791 Alt Duvenstedt info@thm.bike www.thm.bike t h m . b i k e...

Table of Contents