Ir Leds (Night Mode Only); Day/Night Switching - Abus IPCA52010 User Manual

7.7.2.7 IR LEDs (night mode only)

IR LEDs:

7.7.3 Day/night switching

Mode: Select a method for switching between day and night mode.
Auto: Automatic switching according to light conditions
Day: the camera stays in day mode.
Night: the camera stays in night mode.
Schedule: switching at fixed times. An individual schedule for the switch can be
configured under Configuration/schedules.
Delay time:
Day -> night level / night -> day level:
Retain colour in night mode:
If required, IR LEDs can be deactivated in night mode (e.g. for an
installation behind a glass pane, or when using external IR spot lights)
delay in seconds until switching to day or night
mode.
Define the threshold values of the lighting level
here.
The currently measured value for the lighting level
can be seen above the slider.
When enabled, colour information can also be
displayed in night mode. Please note that colours
are displayed incorrectly, especially when using
100