1. General information 1.1 Information about the instruction manual This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
CAUTION! Magnetic field! This symbol informs that the magnetic fields occurring during the device operation may cause interference. To avoid them please follow the instructions. 1.3 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years.
1.5 Declaration of conformity The device complies with the current standards and directives of the EU. We certify this in the EC declaration of conformity. If required we will be glad to send you the according declaration of conformity. 2.Safety This device is designed in accordance with the presently applicable technological standards.
• To prevent hazards and to ensure optimum efficiency, no modifications or alterations to the device that are not explicitly approved by the manufacturer may be undertaken. • This device may only be operated in technically proper and safe condition. •...
Page 7
WARNING! Suffocation hazard! To avoid the hazard results please follow the instructions below. Prevent access of children to the package materials like plastic bags and foamed polystyrene elements. WARNING! Electromagnetic field hazard! To avoid the hazard results please follow the instructions below. The magnetic objects, like credic cards, data storage devices, or calculators, must not be placed in the direct vicinity of the operating device.
Page 8
Do avoid overheating do not place the aliminium foil or metal plates on the surface of the device. WARNING! Fire hazard! To avoid the hazard results please follow the instructions below. Avoid prolonged heating of oils and fats! The overheated oil or fat may quickly ignite.
2.3 Intended use Safe operation is only guaranteed when using the device for its intended purpose. Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. The induction cooker is designed for preparation and warming up of foods using the appropriate crockery.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
4. Technical data Induction serving trolley IKTS 35, code-no.: 105841 Flexible application as the auxiliary cooking station indoors. Mobile solution for catering or cooking directly in the customer’s premises. • dimensions: W 920 x D 600 x H 940 mm •...
Auxiliary plate for using the upper level as a shelf • material: high-grade stainless steel • dimensions: W 600 x D 338 mm • load capacity: 50 kg We reserve the right to make technical changes! 5. Installation • Before the operation unpack the device and remove all package material and protective foil from the serving trolley and induction cooker.
Page 13
1. Assemble the serving trolley. Start the assembly from fixing the shelves to the bows. Keep in mind that the shelf with the cutout must be installed on top. Fix the shelves with use of delivered socket head screws, washers, and nuts, tightening them with hand.
Installation of the auxiliary plate 4. When all trolley levels must be used 5. Put the kitchenware on the trolley as shelves, install the delivered shelves. auxiliary plate in the cutout. Pay 6. Place the trolley in appropriate place attention to the plate stability. and block the castors with brakes.
5.3 Electric connection WARNING! Electric shock hazard! The device can cause injuries due to improper installation! Before installation the local power grid specification should be compared with that of the device (see type label). Connect the device only in case of compliance! The device must only be connected to a properly installed single socket with protective contact.
6. Operation 6.1 Functionality of induction cookers With induction cooker, an electric voltage is applied on a conductor spool beneath the glass. This creates magnetic fields, which directly heat up the bottom of the cookware through a physical effect. This means saving time and energy, because contrary to common hotplates, the cookware is heated up, not the heating element and the glass.
Page 17
2.7 litres ● Ø 18 cm ● height 11.0 cm 5.1 litres ● Ø 24 cm ● height 11.5 cm 6.1 litres ● Ø 20 cm ● height 20.0 cm Bartscher order no. A130442 Unsuitable cookware o vessels with round bottom;...
6.3 Operation instructions • Before the device operation clean it according to the instructions in section 7.2 “Cleaning”. Control panel (for both induction hobs) ① ② ③ ④ ② ③ ④ ① ⑥ ⑤ ⑧ ⑦ ⑦ ⑥ ⑤ ① Blocking buttons ②...
Page 19
CAUTION! Never place empty cookware on an induction hob. Heating an empty pot or pan will activate the overheating protection mechanism, an alarm will sound and the device will turn off. The digital display will show the error message „E2“. If this happens, remove the cookware from the induction hob and leave the device to cool for several minutes.
Page 20
The selection buttons can be used at any time to change the setting within a range of 60 ° C – 240 ° C at intervals of 20 ° C. The selected temperature is displayed on the digital display. The device will heat and maintain food at the set temperature. Power is regulated automatically.
• Now, at any time all changes can be made. The device will now function according to the most recently entered information and settings. • Check to ensure that the bottoms of cookware do not slide around the surface of the hobs, although scratched surfaces do not impact the device’s functioning.
o Never clean the device using substances containing petrol or any other solvent, in order to avoid damage to the device’s surface. o Clean the serving trolley and insertion plate with a soft cloth and mild cleaning agent o Use only a soft cloth and never use any granulated cleaning substances that may damage the device’s surface.
NOTE! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany...
Need help?
Do you have a question about the IKTS 35 and is the answer not in the manual?
Questions and answers