Advertisement
PREPARATION FOR USE
LANGUAGE SELECTION
If you want to change the language of the on-screen menu,
follow the procedure below.
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears
on the TV screen.
4) Press the CH(annel) ▼ or ▲ button to point to "LANGUAGE".
5) Select [ENGLISH], [ESPAÑOL] or [FRANÇAIS]
by using the VOL(ume)
n
or
m
button.
6) Press the MENU button to exit the menu.
CHANNEL PRESETTING
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears on the TV
screen.
3) Press the CH(annel) ▼ or ▲ button to point to "CHANNEL SET UP".
Then press the VOL(ume)
m
button.
4) Press the CH(annel) ▼ or ▲ button to point to "AUTO PRESET CH".
Then press the VOL(ume)
m
button.
The tuner scans and memorizes all active channels in your area.
The TV distinguishes between standard TV channels and cable (CATV)
●
channels.
When AUTO PRESET CH action is completed, the lowest memorized
●
channel reappears on the screen. When there is no signal to ANT in jack,
"NO TV SIGNALS" will appears. In this case, please check the antenna connections, then try
again the auto preset channel.
When you press the CH(annel) ▼ or ▲ button after selecting AUTO PRESET CH,
●
the tuner will stop at the memorized channels only.
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If
●
this happens, try the AUTO PRESET CH action again when reception conditions are better.
OPERATIONS
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) ▼ or ▲ button.
3) Adjust the volume to the desired listening level using the VOL(ume)
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
SETTING THE SLEEP TIMER
The sleep timer function allows you to have the POWER automatically turn
off after a set time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
2) You may change the sleep time by pressing the SLEEP
button on the remote control repeatedly. The timer can be set up to 90
minutes. 10 minutes each time the SLEEP button is
pressed. (The timer display counts up and sleep timer
will be displayed on the screen when you press the
SLEEP button on remote control.)
Note: When you disconnect the unit from the AC outlet or when you have a power failure, the
sleep time will be lost.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro-
grams, movies, news and prerecorded tapes,
etc. with either a dialogue caption or text dis-
play added to the program.
n
m
: Press the VOL(ume)
or
- TV SET UP -
- TV SET UP -
PICTURE
PICTURE
CHANNEL SET UP
CHANNEL SET UP
V-CHIP SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
CAPTION
[CAPTION1]
TV SOUND
[MAIN]
TV SOUND
[MAIN]
BACK LIGHT
[BRIGHT]
BACK LIGHT
[BRIGHT]
n
or
To cancel the sleep timer:
Press the SLEEP button repeated-
ly until "SLEEP 0 MINUTE" is
displayed.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▼ or ▲ button to point
to "CAPTION".
3) Press the VOL(ume)
n
select the mode you wish.
4) When done, press the MENU button to exit
the menu.
button.
- TV SET UP -
- TV SET UP -
PICTURE
PICTURE
CHANNEL SET UP
CHANNEL SET UP
V-CHIP SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
LANGUAGE
[ENGLISH]
CAPTION
[CAPTION2]
CAPTION
[TEXT1]
TV SOUND
[MAIN]
TV SOUND
[MAIN]
BACK LIGHT
[BRIGHT]
BACK LIGHT
[BRIGHT]
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) ▼ or ▲ button to point to "CHANNEL SET UP".
- TV SET UP -
Then press the VOL(ume)
PICTURE
CHANNEL SET UP
3) Press the VOL(ume)
V-CHIP SET UP
LANGUAGE
[ENGLISH]
4) Use the CH(annel) ▼ or ▲ button to select the channel you wish to put
CAPTION
[OFF]
TV SOUND
[MAIN]
into memory or to erase from memory.
BACK LIGHT
[BRIGHT]
Perform "ADD/DELETE CH" function while this display appears on the
screen.
- TV SET UP -
Press the VOL(ume)
PICTURE
●
CHANNEL SET UP
V-CHIP SET UP
in LIGHT BLUE if you wish to add the channel into memory.
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
Press the VOL(ume)
●
TV SOUND
[MAIN]
BACK LIGHT
[BRIGHT]
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
MTS (Multi-Channel Television Sound) SYSTEM
You can listen to a program in MTS stereo by following the steps below.
Menu
- TV SET UP -
Selection
Type of
PICTURE
CHANNEL SET UP
broadcast
V-CHIP SET UP
LANGUAGE
[ENGLISH]
Regular
CAPTION
[OFF]
TV SOUND
[MAIN]
Stereo
BACK LIGHT
[BRIGHT]
broadcast
- CHANNEL SET UP -
SAP
ADD/DELETE CH (TV)
[To Select STEREO, MONO or SAP in Stereo broadcast]
AUTO PRESET CH
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) ▼ or ▲ button to point to "TV SOUND".
3) Press the VOL(ume)
([MAIN], [MONO] or [SAP])
: Press the VOL(ume)
PICTURE ADJUSTMENT
1) Press the MENU button so that the menu
display appears on the TV screen.
m
button.
2) Press the CH(annel)
point "PICTURE". Then press the
VOL(ume)
3) Select the feature you wish to adjust with
the CH(annel) ▼ or ▲ button and adjust it
with the VOL(ume)
: Press the CH(annel) ▼ or ▲ button.
SLEEP 10 MINUTE
BRIGHTNESS
-
Note:
In the above steps, the picture adjustment display will disappear from the TV screen automati-
●
cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume)
button so that "PICTURE" is selected. Then press the CH(annel) ▼ or ▲ button repeatedly
m
until the display returns to the screen.
BACK LIGHT SELECTION
1) Press the MENU button so that the menu display appears on the TV screen.
or
m
button to
2) Press the CH(annel) ▼ or ▲ button to point to "BACK LIGHT".
3) Press the VOL(ume)
4) When done, press the MENU button to exit the menu.
: Press the VOL(ume)
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[TEXT2]
TV SOUND
[MAIN]
BACK LIGHT
[BRIGHT]
m
button.
m
button so that "ADD/DELETE CH" is selected.
m
button to light up the channel number
m
button to light up the channel number
MAIN
MONO
SAP
-None-
-None-
-None-
STEREO
MONO
STEREO
MAIN
MAIN
SAP
n
or
m
button to select your desired stereo mode.
n
or
m
button.
- TV SET UP -
- TV SET UP -
PICTURE
PICTURE
CHANNEL SET UP
CHANNEL SET UP
V-CHIP SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
CAPTION
[OFF]
TV SOUND
[MAIN]
TV SOUND
[MONO]
BACK LIGHT
[BRIGHT]
BACK LIGHT
[BRIGHT]
▼ or ▲ button to
BRIGHTNESS
m
button.
CONTRAST
COLOR
n
or
m
button.
TINT
SHARPNESS
CONTRAST
COLOR
+
-
+
-
n
or
m
button to select the mode you wish.
n
or
m
button.
- TV SET UP -
- TV SET UP -
PICTURE
PICTURE
CHANNEL SET UP
CHANNEL SET UP
V-CHIP SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
CAPTION
[OFF]
TV SOUND
[MAIN]
TV SOUND
[MAIN]
BACK LIGHT
[BRIGHT]
BACK LIGHT
[NORMAL]
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
TV SOUND
[MAIN]
BACK LIGHT
[BRIGHT]
- CHANNEL SET UP -
ADD/DELETE CH (TV)
AUTO PRESET CH
To show the status, press the
DISPLAY button on the remote
control.
SAP: Second Audio Program,
which means your program, can
also be received in a second lan-
guage or sometimes a radio station.
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
TV SOUND
[SAP]
BACK LIGHT
[BRIGHT]
VOL(ume)
VOL(ume)
to decrease
to increase
brightness
brightness
to decrease
to increase
contrast
contrast
to pale
to brilliant
to purple
to green
to soft
to clear
TINT
SHARPNESS
+
-
+
-
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
TV SOUND
[MAIN]
BACK LIGHT
[DARK]
+
Advertisement
