Hitachi NV 50AF3 Handling Instructions Manual page 15

English
Depending on the conditions at the workplace and the
form of the workpiece, individual noise attenuation meas-
ures may need to be carried out, such as placing workpieces
on sound-damping supports, preventing workpiece vi-
bration by means of clamping or covering, adjusting to
the minimum air pressure required for the operation
involved,etc.
In special cases it is necessary to wear hearing protection
equipment.
Vibration Information
The typical vibration characteristic value in accordance
2
with Dr prEN 792-13, JUNE,1997 does not exceed 2.5 m/s .
This values is a tool-related characteristic value and does
not represent the influence to the hand-arm-system
when using the tool. An influence to the hand-arm-
system when using the tool will for example depend on
the gripping force, the contact pressure force, the work-
ing direction, the adjustment of energy supply, the
workpiece, the workpiece support.
14