Over The Air Firmware Update; Automatic Update Alert - KEF LSX User Manual

7.5

Over the Air Firmware Update

7.5.1

Automatic Update Alert

1. You will be reminded to update the firmware if a newer version is available. Tap
"Update" to continue.
2. Connect the Master and Slave Speakers with the provided inter-speaker cable through
the "To Master/Slave" connection ports on the back of the speakers and then tap
"Next". Cable Mode will also be automatically activated (see chapter "Cable Mode").
3. Wait until the firmware is downloaded and updated.
2.
The entire process may take around 20 minutes. The KEF Control app must
be KEPT IN THE FOREGROUND. DO NOT unplug the power cables,
DO NOT disconnect the inter-speaker cable and DO NOT reset speakers
during the upgrade.
3.
21