Ws2000>Admin(Network.fw)> Set - Symbol WS 2000 System Reference Manual

10-34 WS 2000 Wireless Switch System Reference Guide
WS2000>admin(network.fw)> set
Description:
Sets firewall parameters. In the Web interface, this functionality is provide by the Network->Firewall screen.
Syntax:
set mode enable/disable
override enable/disable
ftp enable/disable
ip enable/disable
mime filter
hdr
len
seq enable/disable
src enable/disable
syn enable/disable
timeout <time>
win enable/disable
Example:
admin(network.fw)>set mode enable
admin(network.fw)>set override disable
admin(network.fw)>set ftp enable
admin(network.fw)>set mime hdr 3000
admin(network.fw)>
admin(network.fw)>show all
Firewall Status
Subnet Access Override
Configurable Firewall Filters
ftp bounce attack filter
syn flood attack filter
unaligned ip timestamp filter
source routing attack filter
winnuke attack filter
seq num prediction attack filter
mime flood attack filter
max mime header length
max mime headers
Always On Firewall Filters
Enables or disables the firewall.
Enables or disables subnet access override.
Enables or disables FTP bounce attack check.
Enables or disables IP unaligned timestamp check.
enable/disable Enables or disables MIME flood attack check.
<count> Sets the max number of headers as specified in <count> (with value in
range 12–34463).
<length> Sets the max header length in bytes as specified by <length> (with
value in range 256–34463).
Enables or disables sequence number prediction check.
Enables or disables source routing check.
Enables or disables SYN flood attack check.
Sets the firewall timeout to <time> minutes (1–90).
Enables or disables Winnuke attack check.
: enable
: disable
: enable
: enable
: enable
: enable
: enable
: enable
: enable
: 34463
: 3000