Wand Emulation Parameter Defaults - Symbol DS 6608 Product Reference Manual

10-4 DS 6608 Product Reference Guide
2. Connect the other end of the Wand Emulation interface cable to the wand port on the mobile computer or controller.
3. Select the Wand Emulation host type by scanning the appropriate bar code from
4. To modify any other parameter options, scan the appropriate bar codes in this chapter.
Connect the digital scanner to 5 volt decoders only. Connecting the digital scanner to a 12 volt
decoder can damage the digital scanner and invalidate the warranty.
WARNING

Wand Emulation Parameter Defaults

Table 10-1 lists the defaults for Wand Emulation host types. To change any option, scan the appropriate bar code(s) provided in
Emulation Host Parameters on page
See Appendix A, Standard Default Parameters
miscellaneous default parameters.
Note
Wand Emulation Host Parameters
Wand Emulation Host Types
Leading Margin
Polarity
Ignore Unknown Characters
Convert All Bar Codes to Code 39
Convert Code 39 to Full ASCII
10-5.
for all user preferences, hosts, symbologies, and
Table 10-1. Wand Emulation Default Table
Parameter
Wand Emulation Host Types on page
Default Page Number
Symbol OmniLink Interface 10-5
Controller
80 msec 10-6
Bar High/Margin Low 10-7
Ignore 10-8
Disable 10-8
Disable 10-9
10-5.
Wand