Chapter 8. Usb Interface; Introduction; Connecting A Usb Interface - Symbol DS 6608 Product Reference Manual

Introduction

This chapter describes how to set up the digital scanner with a USB host. The digital scanner connects directly to a USB host, or a
powered USB hub, and is powered by it. No additional power supply is required.
Throughout the programming bar code menus, default values are indicated with asterisks (
*
Indicates Default
Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the screen, be sure
to set the document magnification to a level where the bar code can be seen clearly, and bars and/or spaces are not
Note merging.

Connecting a USB Interface

USB Series A Connector
The digital scanner connects with USB-capable hosts including:
• Desktop PCs and notebooks
• Apple™ iMac, G4, iBooks (North America only)
• IBM SurePOS terminals
• Sun, IBM, and other network computers that support more than one keyboard.
The following operating systems support the digital scanner through USB:
®
• Windows 98, 2000, ME, XP
• MacOS 8.5 and above
• IBM 4690 OS.
The digital scanner also interfaces with other USB hosts which support USB Human Interface Devices (HID). For more information on
USB technology, hosts, and peripheral devices, visit www.symbol.com/usb.
*
North American Standard USB Keyboard
Figure 8-1. USB Connection
USB Interface 8-3
*
).
Feature/Option
Interface Cable