Spare Battery Charging - Symbol MC9000-G Product Reference Manual

1-12 MC9000-G Product Reference Guide for Embedded Windows® CE .NET

Spare Battery Charging

The mobile computer has three accessories that can be used to charge spare batteries.
• Single Slot Serial/USB Cradle
• Four Slot Spare Battery Charger
• UBC Adapter.
To charge a spare battery:
1. Connect the charging accessory to the appropriate power source, see
Accessories
2. Insert the spare battery into the spare battery charging slot and gently press down on the
battery to ensure proper contact.
3. The battery starts to charge automatically. The amber charge LED on the accessory lights to
show the charge status, see
The battery usually fully charges in less than four hours.
A Short Battery Adapter is required to charge the MC9000-S spare battery in
either the Single Slot Serial/USB Cradle or the Four Slot Spare Battery
Charger, see
Battery Charger on page
for setup.
Chapter 7, Accessories
Single Slot Serial/USB Cradle on page 7-8
7-16.
Chapter 7,
for charging indications.
or Four Slot Spare