Codes Window - Symbol MC9000-G Product Reference Manual

5-8 MC9000-G Product Reference Guide for Embedded Windows® CE .NET

Codes Window

The Codes window is used to set the scan type parameter.
• Tap Param to select the code types, tap in the box to select a code type.
• To set parameters for a code type, tap the code type to highlight it and then tap Param to
display the Code Parameters Sample Window, see
parameter settings specific to that code type, so the windows will differ.
• To set length for a code type, tap the code type to highlight it and then tap Length to display
the code length sample window, see
settings specific to that code type, so the setting windows will differ.

Codes Window

Figure
Code Parameters Sample Window
Figure 5-4. ScanSamp2 Examples
Figure 5-4. Different code types will have
5-4. Different code types will have length
Code Length Sample Window