Four Slot Spare Battery Charger; Spare Battery Charging; Battery Charging Indicators - Symbol MC50 User Manual

Four Slot Spare Battery Charger

This section describes how to use the Four Slot Spare Battery Charger to charge up to four MC50 spare batteries.
Use only a Symbol-approved power supply (p/n 50-14000-148) output rated 12 Vdc and minimum 3.33A. The
power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will invalidate any
approval given to this device and may be dangerous.
Hinweis: Benutzen Sie nur eine von Symbol Technologies genehmigte Stromversorgung (Teilenr. 50-14000-148) mit einer
Ausgangsleistung von 12 V (Gleichstrom) und mindestens 3.33A. Die Stromversorgung ist nach EN60950 für die
Verwendung in SELV-Stromkreisen zertifiziert. Bei Verwendung eines anderen Netzteils werden alle für das Gerät
gewährten Genehmigungen außer Kraft gesetzt, und der Betrieb kann gefährlich sein.

Spare Battery Charging

1. Connect the charger to a power source.
2. Insert the spare battery into a spare battery charging well and gently press down on the battery to ensure proper contact.

Battery Charging Indicators

An amber LED is provided for each battery charging well. See
charges in approximately 2.5 hours and the extended capacity battery fully charges in approximately six hours.
Off
Fast Blinking Amber
Slow Blinking Amber
Solid Amber
Spare Battery
Charging LEDs (4)
Figure 3-7. Four Slot Spare Battery Charger
Table 3-2. Spare Battery LED Charging Indicators
LED
No spare battery in slot; spare battery not placed correctly; cradle is not powered.
Error in charging; check placement of spare battery.
Spare battery is charging.
Charging complete.
Spare Battery
Table 3-2 for charging status indications. The standard battery fully
Indication
Accessories 3-9