Festool SYSLITE KAL II Original Operating Manual page 13

Compact working light
Charge time of internal battery 90% / 100%
Permitted operating temperature range
Permitted battery temperature for charging
Weight (without external battery pack)
Protection category
5 Machine features
[1-1] Charging state indicator LED
[1-2] On/off switch with 3 settings
[1-3] Folding attachment handle
[1-4] Connecting socket for charging
adapter
[1-5] Magnetic foot with spherical head*
[1-6] Adapter plate*
[1-7] Specific charging adapter for coun-
try*
[1-8] Vehicle charging adapter
[1-9] Mains charging adapter*
[2-1] Threaded socket for tripod UNC 1/
4"-20
* not on all versions included in the
scope of delivery
6 Operation

Prior to initial operation: charge
battery pack for approx. 4 h!
Max. light: Stage 2 (100%)
6.1 Charging the integral battery
pack

Insert the mains or vehicle charging
adapter into the connecting socket [1-
4].
When the light is switched off, the
charging state indicator LED [1-1] dis-
plays the operating state of the internal
battery for the duration of the charging
process:
LED green - flashing quickly
Charging internal battery at maximum
rate.
LED green - flashing slowly
80% of internal battery capacity exceed-
ed.
LED green - continuous light
Internal battery is charged to 90% and
then charged fully at reduced power.
LED red - flashing
General fault indication, e.g. incomplete
contact, short circuit, battery faulty.
LED red - continuous light
Battery temperature is outside the per-
mitted range.
KAL II
KAL II
769 Lumen
2 h 40 min / 3 h 20 min.
-5 °C to +55 °C
0 °C to +45 °C
GB
0,7 kg
IP 2X
13