Chapter-11: Automatic Fault Warnings And What To Be Done; Disposal Of Your Old Machine - Sharp ES-GFD9144W3-EE User Manual

CHAPTER -11: AUTOMATIC FAULT WARNINGS AND
WHAT TO BE DONE
ERROR CODE POSSIBLE FAULT
The door of your machine is
Check the door
left open.
Check water Water cut-off or low mains
inlet. water pressure.
The pump is faulty or pump
UNPLUG THE filter is clogged or electrical
MACHINE connection of the pump is
faulty.
The pump is faulty or pump
CHECK THE filter is clogged or electrical
FILTER. connection of the pump is
faulty.
Your machine has excessive
Turn off the tap.
amount of water.
Voltage is high/
Mains voltage is high or low.
Voltage low

DISPOSAL OF YOUR OLD MACHINE

This symbol on the product or package implies that the product should not be treated as domestic waste.
Instead, it should be delivered to applicable waste collection places recycling electrical and electronic
equipment. You will contribute to avoid potential negative results regarding environment and human health,
which will arise due to wrong waste procedure for the product by ensuring that this product is annihilated
properly. Recycling materials will help natural resources be preserved. For more detailed information regarding
recycling of this product, please contact local municipality, domestic waste annihilation service or the shop you
have purchased the product.
WHAT TO DO
Close the machine door.
If your machine persists to indicate fault, turn off your
machine, unplug it and contact the nearest authorised
service company immediately.
- Water tap may be closed. Check.
- Mains water may be cut-off. Check.
- If there is no water, turn off the appliance pressing the
on / off button found above the programme knob. - If there
is water again, you can turn on the appliance pressing
the on / off button and operate your appliance selecting a
programme using the programme knob.
- Mains water pressure may be low.
Check.
- Water inlet hose may be twisted.
Check.
- Water inlet hose may be clogged.
- Clean water inlet hose and valve inlet filters.(*)
If the problem persists, unplug your machine, turn off your
tap and contact the nearest authorised service company.
Clean the pump(**)filter.
If the problem persists, contact the nearest authorised
service company.
- Pump filter may be clogged.
- Clean the pump filter. (**)
- Drain hose may be clogged or twisted.
- Check the Drain hose.
- If the problem persists, contact the nearest authorised
service company.
Your machine will drain water by itself.
Pursuant to draining operation, turn off your machine and
unplug it. Turn off your faucet and contact the nearest
authorised service company.
There might be a fluctuation on the energy fed to your
machine,
check if the socket you have your machine plugged into
is grounded. Have an electrician measure the amount of
voltage coming to your house. If there is no problem in the
electricity, unplug your machine and inform the nearest
service company.
EN -22-