Overlay Series Door Panel And Cabinetry Clearance - KitchenAid KBSN608ESS Installation Manual

The custom door panels and adjacent cabinetry must be designed so that there is sufficient clearance for the doors to swing open. If the
refrigerator is to be installed close to the wall, see "Door Swing 90°" on next page.
NOTE: For Overlay Series models, rout
the hinge side of the custom door panels
to a radius that is equal to at least half the
thickness of the panel if a 130
is desired. See "Adjust Doors."
When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinetry to some degree.
10

Overlay Series Door Panel and Cabinetry Clearance

door swing
°
Door Swing 110°
Actual Size
Refrigerator to
Cabinetry Clearance
Refrigerator
Side Trim
Cabinetry
Hinge
1/2"
(1.3 cm)
1 ⁄ "
1
2
(3.8 cm)
1 ⁄ "
1
4
(3.2 cm)
1"
(2.5 cm)
1/4"
(6.35 mm)
1/2"
(1.3 cm)
3/4"
(1.9 cm)
1"
(2.5 cm)
NOTE: Allow
1/2" (1.3 cm) clearance
between overlay panel
and cabinetry.
3/4"
(1.9 cm)
1"
(2.5 cm)
1 1 ⁄ "
4
(3.2 cm)
1 ⁄
1
(3.8 cm)
Spacer Panel
"
2