Smartclean System - Philips AquaTouch 5000 Series Manual

40
English
Problem
A shaving head
symbol has
suddenly
appeared on the
display.
Water is leaking
from the bottom
of the appliance.

SmartClean system

Problem
The SmartClean
system does not
work when I
press the on/off
button.
The shaver is not
entirely clean
after I clean it
with the
SmartClean
system.
Possible cause
This symbol is the
replacement
reminder.
During cleaning,
water may collect
between the inner
body and the outer
shell of the
appliance.
Possible cause
The SmartClean
system is not
connected to the
wall socket.
The cleaning
cartridge is empty.
The replacement
symbol flashes to
indicate that you
have to replace the
cleaning cartridge.
You have not
placed the shaver in
SmartClean system
properly, so there is
no electrical
connection
between
SmartClean system
and the shaver.
Solution
Replace the shaving
heads.
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
Solution
Put the small plug in the
SmartClean system and put
the supply unit in the wall
socket.
Place a new cleaning
cartridge in the SmartClean
system.
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.