4titude 4S2 User Manual page 12

Figure 3.A
To change the voltage setting proceed as follows:
1. Open fuse holder compartment with a screwdriver, figure 3A.
2. With the screwdriver lever out the fuse holder, figure 3B.
3. Replace the two fuses according to the table below:
4. Insert the fuse holder keeping the set voltage label at the top.
5. Close the fuse compartment by pressing gently.
6. If the fuse holder is inserted correctly you can read the voltage selected.
Power Voltage
115v
230v
Table
Figure 3B
(EN 60127)
3.15A (T)
2A (T)
9