Timer Program Extension - Sylvania SRC2319 Owner's Manual

3
Set the channel number
Press the PLAY/K or STOP/L but-
ton until the desired channel num-
ber appears.
(Example: CH61)
Then, press the F.FWD/B button.
Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be recorded is selected on
the cable box or satellite box.
4
Select once, every day or weekly recording
For once recording :
Press the PLAY/K (up) button
until the desired date appears.
(Example: "7/04" for July 4th).
Then, press the F.FWD/B but-
ton.
For every day recording : To record a TV program at
the same time on the same channel every day.
(Example: Monday through Sunday) :
Press the STOP/L (down) button
until "EVRY DAY" appears.
Then, press the F.FWD/B but-
ton.
For weekly recording : To record a
TV program at the same time on the same channel
every week. (Example: every Monday) :
Press the STOP/L (down) button
until "EVRY" and your desired
day of the week appear together.
Then, press the F.FWD/B but-
ton.
5
Set beginning hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: " 7, PM" for 7:30PM)
Then, press the F.FWD/B button.
6
Set beginning minute
Press the PLAY/K or STOP/L but-
ton until the desired minute
appears. (Example: "30" for
7:30PM)
Then, press the F.FWD/B button.
7
Set end hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: "8, PM" for 8:50PM)
Then, press the F.FWD/B button.
8
Press the PLAY/K or STOP/L but-
– TIMER PROGRAMMING –
ton until the desired minute
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
appears. (Example: "50" for
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B 61 -/- - - - - -:- - -:- - - -
8:50PM)
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
Then, press the F.FWD/B button.
- - -/- - - - - -:- - -:- - - -
9
Press the PLAY/K or STOP/L but-
ton until the desired tape speed
appears. (Example: SP)
– TIMER PROGRAMMING –
10
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - - Press the F.FWD/B or REW/s button. The program
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
is now completed.
B 61 7/04 FRI -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
•
To set another program, repeat steps [2] to [10].
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
•
Press the MENU button on the remote control to
return to original mode.
11
– TIMER PROGRAMMING –
CH DATE BEGIN END Press the POWER button to set automatic timer
- - -/- - - - - -:- - -:- - - -
recording. The RECORD indicator lights up.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B 61 EVRY DAY -:- - -:- - - -
•
You must turn off the TV/VCR to activate automat-
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
ic timer recording.
- - -/- - - - - -:- - -:- - - -
If power is not turned off and you continue watch-
ing TV, "TIMER REC STANDBY" starts flashing
on the TV screen 2 minutes before the programmed
– TIMER PROGRAMMING –
start time.
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B 61 EVRY MON -:- - -:- - - -

TIMER PROGRAM EXTENSION

- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
To shift the time schedule of an automatic timer
recording.
– TIMER PROGRAMMING –
1)Press the POWER button.
CH DATE BEGIN END
2)Repeat step [1] on page 21.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P 3)Press the RECORD button and select the desired
B 61 7/04 FRI 7:12 -:- - - -
M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
program using the PLAY/K or STOP/L button.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
4)Press the RECORD button again.
Each additional push will shift forward the
begin/end time for recording by 10 minutes. When
– TIMER PROGRAMMING –
the recording is already in progress, each additional
CH DATE BEGIN END
push will shift forward the end time only. If you
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
want to cancel while setting, press the
- - -/- - - - - -:- - -:- - - -
P
B 61 7/04 FRI 7:30 -:- - - -
M
- - -/- - - - - -:- - -:- - - -
PAUSE/STILL button on the remote control. The
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - - recording time returns to the original time.
NOTE: When you shift forward the time schedule
during recording, the recording speed will automat-
ically be set to the SLP mode.
– TIMER PROGRAMMING –
CH DATE BEGIN END
5)Press the F.FWD/B or REW/s button to exit the
- - -/- - - - - -:- - -:- - - -
setting menu. Then press the MENU button on the
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/04 FRI 7:30 8:30 - -
M M
remote control to return to original mode.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- 22 -
Set end minute
Set the tape speed
Finish setting the program
Set the timer
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/04 FRI 7:30 8:50 - -
M M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/04 FRI 7:30 8:50 SP
M M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
EN
1K09