Table Of Contents; Introduction - Husqvarna DS 500 Operator's Manual

Introduction..................................................................... 2
Safety..............................................................................3
Assembly........................................................................ 6
Installation.......................................................................7
Operation...................................................................... 10
Product description
The Husqvarna DS 500 is a drill stand for Husqvarna
drill motors.
• The stand is for drilling in ceilings, walls and floors.
• The drill stand is stable and can be used to drill
dimensions of a maximum diameter of 500 mm.
Product overview
23
22
21
20
19
1. Operator's manual
2. Wrench, 24-32 mm
2

Introduction

1
2
24
18
Contents
Maintenance................................................................. 10
Transportation and storage...........................................11
Technical data.............................................................. 13
Service..........................................................................13
Warranty....................................................................... 14
• The column can be tilted 0-90°.
• The drill stand has a quick mounting plate for the drill
motor.
• The feed lever can be used to set the column tilt and
to lock the quick mounting.
• It is possible to use a 2 m long column (accessory)
on the drill stand.
4
3
17
16
15
14
13
12
11
3. Level indicator
4. End stop
5
6
7
8
9
10
922 - 004 - 27.09.2019