Connections; Connection Of Main Unit; Connection To Cable Box Or Satellite Box - Sylvania 6727FRE Owner's Manual

C
ONNECTIONS

Connection of Main Unit

Connection to Cable Box or Satellite Box

Cable
Select this connection when you want to view or record a scrambled channel. With this connection, channels
cannot be changed on the TV/VCR/DVD unit. You can view or record ONLY the channels you have selected
on the cable box or the satellite box.
• While you are recording, only the recorded channel can be viewed.
To select channels of the cable box or satellite box
1) Turn on this unit by pressing POWER button. Then, press the CHANNEL K / L buttons to select channel 3
or 4 (the same channel as the output channel of the cable box or satellite box).
2) At the cable box or satellite box, select the channel you want to view or record.
Note for the Cable TV System Installer:
This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the National Electrical Code, which pro-
vides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the
building as close to the point of cable entry as possible.
10
Antenna
Cable
Signal
or
1
Connect
2
Plug in the AC power cord of this unit.
(Cable box or
Satellite box)
IN
O U T
Signal
AUDIO OUT
COAXIAL
(Rear of main unit)
AUDIO OUT
COAXIAL
(Rear of main unit)