Table of Contents
Advertisement
OPERATING TV
T
V FUNCTIONS
Watching TV Program
POWER
Number
1
Press POWER button to turn on the unit.
2
Select the desired channel using CHANNEL
K / L buttons or the Number buttons on the
remote control.
If the TV/VCR/DVD is connected to a cable box
or satellite box, the TV/VCR/DVD must be on
channel 3 or channel 4, then the channel to be
viewed must be selected on the cable box or
satellite box.
3
Adjust the volume to the desired listening level
using VOLUME X / Y buttons.
4
Adjust picture controls for a natural looking
image. Refer to "Adjusting Picture" on page 23.
Degaussing
Magnetism from nearby appliances and unshielded
speaker systems might affect the color of the TV
picture.
If this happens, move this TV/VCR/DVD away from
the appliance. If the color is still not correct, unplug
the power cord, then plug it in again 30 minutes
later.
22
Setting Sleep Timer
CHANNEL K / L
VOLUME X / Y
The sleep timer function automatically turns off the
power at a specified time period.
1
Press SLEEP button.
Sleep timer menu will appear.
2
Press SLEEP button repeatedly to change the
sleep time.
The timer can be set up to 2 hours, by 30 min-
utes each time you press SLEEP button.
3
To cancel the sleep timer, press SLEEP button
repeatedly until "SLEEP TIMER [OFF]" is dis-
played.
NOTE:
• If you disconnect the unit from the AC outlet, or if you have
a power failure, the sleep time setting will be lost.
• This function does not operate during Recording mode.
SLEEP
SLEEP TIMER [OFF]
Advertisement
Table of Contents
