Manual Clock Setting; To Change Clock Setting - Sylvania RSEC313E Owner's Manual

MANUAL CLOCK SETTING

Make sure ...
•
The TV/VCR is turned on.
In the example below, the clock is to be set to:
DATE May 6th, 2004
SETTING TIME 5:40PM
1
Select "SETTING CLOCK"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L
button to point to "SETTING
CLOCK".
Then press the F.FWD/B button.
2
Select "MANUAL CLOCK SET"
Press the PLAY/K or STOP/L
button to point to "MANUAL
CLOCK SET".
Then press the F.FWD/B button.
3
Select the month
Press the PLAY/K or STOP/L but-
ton until your desired month
appears. (Example: May → 05)
Then press the F.FWD/B button.
4
Select the day
Press the PLAY/K or STOP/L but-
ton until your desired day appears.
(Example: 6th → 06)
Then press the F.FWD/B button.
5
Select the year
Press the PLAY/K or STOP/L but-
ton until your desired year appears.
(Example: 2004)
Then press the F.FWD/B button.
6
Select the hour
Press the PLAY/K or STOP/L but-
ton until your desired hour appears.
(Example: 5, PM)
Then press the F.FWD/B button.
7
Select the minute
Press the PLAY/K or STOP/L but-
ton until the desired minute
appears. (Example: 40)
8
Press the MENU button on the
remote control.
Although seconds are not displayed,
they begin counting from 00 when
you press the MENU button on the
remote control. Use this feature to
synchronize the clock with the correct time.
NOTE:
– M E N U –
When unplugging the AC cord or if there is a power
TIMER PROGRAMMING
PICTURE CONTROL
failure for more than 3 seconds, you may have to
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
reset the clock.
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH

TO CHANGE CLOCK SETTING

If you want to change the clock,
1) Follow steps [1] and [2].
– SETTING CLOCK – 2) Select where you want to change using the
F.FWD/B or REW/s button.
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
3) Enter correct numbers using the PLAY/K or
B MANUAL CLOCK SET
D.S.T. [OFF]
STOP/L button.
4) Press the MENU button on the remote control to
start the clock.
– MANUAL CLOCK SET –
PLEASE NOTE:
MONTH DAY YEAR
0 5 / – – – – – – – – –
If there is no local PBS station in your area or on
HOUR MINUTE
your cable system, select "AUTO CLOCK" and
– – : – – – –
press the F.FWD/B or REW/s button to turn [OFF]
this function. Then you can manually adjust the
clock.
– MANUAL CLOCK SET –
MONTH DAY YEAR
AUTOMATIC CLOCK SETTING
0 5 / 0 6 – – – – – – –
Make sure ...
HOUR MINUTE
•
The TV/VCR is turned on.
– – : – – – –
•
Confirm the TV/VCR is receiving a RF (Radio
Frequency) signal from either an antenna or cable
system connection using the ANT. terminal on the
– MANUAL CLOCK SET –
rear of the TV/VCR.
MONTH DAY YEAR
NOTE:
0 5 / 0 6 THU 2 0 0 4
•
If a cable converter box is being used, make sure it
HOUR MINUTE
– – : – – – –
is powered on.
•
You must use the TV/VCR remote control to per-
form the clock setting procedure.
– MANUAL CLOCK SET –
•
If the TV/VCR is connected directly to a cable
MONTH DAY YEAR
converter box or satellite box, the local PBS station
0 5 / 0 6 THU 2 0 0 4
must be selected on the cable box itself and the
HOUR MINUTE
TV/VCR must be set to the output channel of the
0 5 : – – PM
cable converter box or satellite box (usually chan-
nel 3 or 4), to be able to set up or correct the clock
automatically.
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 THU 2 0 0 4
HOUR MINUTE
0 5 : 4 0 PM
- 11 -
Start the clock
5:40 PM
EN
9I03