Table of Contents
Advertisement
Video Off Method
This option determines the manner when the monitor goes blank.
V/H SYNC+Blank (Default)
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS Support
Initial display power management signaling.
Modem Use IRQ
This determines the IRQ, which can be applied in MODEM use.
The Choices: 3 (Default) / 4 / 5 / 7 / 9 / 10 / 11 / NA
Soft-Off by PWRBTN
This item determines the behavior of system power button. Instant off
turn off the power immediately, and Delay 4 Sec. will require you to
press and hold the power button for 4 seconds to cut off the system
power.
The Choices: Delay 4 Sec / Instant-Off (Default)
PowerOn by PCI Card
When you select Enabled, a PME signal from PCI card returns the
system to Full ON state.
For this function to work, you may need a LAN add-on card which
supports the Wake on LAN function. Set the Wake on LAN (WOL)
jumper on motherboard to enable if applicable.
The Choices: Disabled (Default) / Enabled
ACPI XSDT Table
The Choices: Enabled (Default) / Disabled
HPET Support
This option allows you to disabled or enables the High Precision Event
Timer.
The Choices: Enabled (Default) / Disabled
A690E-IS
47
Advertisement
Table of Contents
