Biostar A690E-IS Setup Manual page 34

Mini-ITX Mainboard Manual
DQS Training Control
The Choices: Skip DQS (Default) / Perform DQS
CKE base power down mode
The Choices: Enabled (Default) / Disabled
CKE based powerdown
The Choices: Per Channel (Default) / Per CS
Memclock tri-stating
The Choices: Disabled (Default) / Enabled
Memory Hole Remapping
The Choices: Enabled (Default) / Disabled
Auto Optimize Bottom IO
The Choices: Enabled (Default) / Disabled
Bottom of [31:24] IO space
The Choices: Min=0000, Max=00FF, Key in a HEX number
Bottom of UMA DRAM [31:24]
The Choices: Min=0000, Max=00FC, Key in a HEX number
CAS Latency
The Choices: Auto (Default) / 2.0 / 3.0 / 4.0 / 5.0 / 6.0
DRAM Command Mode
The Choices: Auto (Default) / 1T / 2T
DDRII Timing Item
The Choices: Disabled (Default) / Enabled
TwTr Command Delay
The Choices: 3 bus clocks (Default) / 1 bus clocks / 2 bus clocks
Trfc0/1/2/3 for DIMM0/1/2/3
The Choices: 75ns (Default) / 105ns / 127.5ns / 195ns / 327.5ns
34