Table of Contents
Advertisement
SB600 Spread Spectrum
The Choices: Enabled (Default) / Disabled
SuperIO Device
Onboard Parallel Port
Selece an address for the parallel port.
The Choices: 378/IRQ7 (Default) / Disabled / 278/IRQ5 / 3BC/IRQ7
Parallel Port Mode
This option allows you to set parallel port mode.
The Choices: SPP (Default) / EPP / ECP / ECP+EPP
ECP Mode Use DMA
Select DMA if using ECP mode for parallel port.
The Choices: 3 (Default) / 1
PWRON After PWR-Fail
This setting specifies whether your system will reboot after a power
fail or interrupts occurs.
Off
Leaves the computer in the power off state.
On
Reboots the computer.
Former-Sts
Restores the system to the status before power
failure or interrupt occurs.
The Choices: Off (Default) / On / Former-Sts.
A690E-IS
43
Advertisement
Table of Contents
