Table of Contents
Advertisement
4
Delete (or add) it from (into) memory
Press the F.FWD/B or REW/s button. The channel
number changes to light red. The channel is deleted
from memory.
•
To delete another channel, repeat steps [3] and [4].
•
If you press the F.FWD/B or REW/s button
again, the channel is memorized again.
Added channel: Light blue.
Deleted channel: Light red.
5
Exit the channel setup mode
Press the MENU button on the remote control to
returns to TV mode.
NOTE: To confirm that channel(s) has been deleted
or added, press the CHANNEL K or L button.
SELECTING THE LANGUAGE
Make sure ...
•
Press the POWER button to turn on the TV/VCR.
NOTE: This function effects only the language on
the screen menu and not the audio source.
1
Select "LANGUAGE"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "LANGUAGE".
2
Select "ENGLISH" or "ESPAÑOL"
Select "ENGLISH" or "ESPAÑOL"= Spanish using
the F.FWD/B or REW/s button.
3
Exit the Language mode
Press the MENU button on the remote control to
return to TV mode.
NOTE: If for some reason the menu is in Spanish,
press the MENU button on the remote control, press
the PLAY/K button to point to "IDIOMA
[ESPAÑOL]", then press the F.FWD/B button, then
press the MENU button on the remote control.
Select this feature and the TV/VCR's clock automati-
cally will advance one hour in April, then reverse one
hour in October.
When Daylight-Saving Time is ON, the clock will
change automatically as follows:
•
First Sunday of April :
diately changes to 3 AM. Any timer programming
you have set to occur between 2 AM and 3 AM
will not record.
•
Last Sunday of October :
immediately changes to 1 AM.
Make sure ...
•
Press the POWER button to turn on the TV/VCR.
1
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "SETTING
CLOCK".
Then, press the F.FWD/B button.
2
Press the PLAY/K or STOP/L but-
ton to point to "D.S.T.".
– M E N U –
Then, press the F.FWD/B or
TIMER PROGRAMMING
PICTURE CONTROL
REW/s button until [ON] appears.
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
B LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
3
Press the MENU button on the remote control to
return to TV mode.
TO CANCEL THE DAYLIGHT-SAVING
TIME
Repeat steps [1] to [2], select [OFF] using the
F.FWD/B or REW/s button. Then, press the MENU
button to return to TV mode.
- 14 -
DAYLIGHT-SAVING TIME
At 2 AM the clock imme-
Select "SETTING CLOCK"
Set "D.S.T." (Daylight-Saving Time) to [ON]
Exit the Daylight-Saving Time mode
At 2 AM the clock
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
AUTO CLOCK
[ON]
AUTO CLOCK CH
[AUTO]
MANUAL CLOCK SET
B D.S.T.
[ON]
EN
9J27
Advertisement
Table of Contents
