Table of Contents
Advertisement
NOTES:
•
Auto clock setting only needs to be set once. But it
can be done again if the clock's time has become
incorrect for some reason.
•
If the TV/VCR is connected directly to a cable
converter box or satellite box, the local PBS station
must be selected on the cable box itself, and the
TV/VCR must be set to the output channel of the
cable converter box or satellite box (usually chan-
nel 3 or 4), to be able to set up or correct the clock
automatically.
If you do not know what your local PBS station is,
then follow "Manual Clock Settings".
The TV/VCR cannot control the channels of the
cable converter box or satellite box.
1
Select "SETTING CLOCK"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "SETTING
CLOCK".
Then, press the F.FWD/B button.
2
Set "AUTO CLOCK" to [ON]
Press the F.FWD/B or REW/s
button repeatedly until [ON]
appears.
3
Enter the channel number for the PBS station
Press the PLAY/K or STOP/L button to point to
"AUTO CLOCK CH".
Then press the F.FWD/B or
REW/s button until the channel
number for your local PBS station
appears.
If you do not know the PBS channel number, leave it
set to [AUTO] which is located before [2]. The
TV/VCR will search automatically all available chan-
nels for the local PBS station, and will select that
channel.
4
Exit the Auto Clock Setting
Press the MENU button on the remote control to
return to TV mode.
5
Turn off the TV/VCR
Turn the TV/VCR off. Because the Auto Clock func-
tions automatically while the TV/VCR is off.
If you choose [AUTO],
•
The TV/VCR must search until the PBS channel is
found. It must scan each channel for a couple of
seconds to determine if that channel is transmitting
the XDS signal.
•
If the time, that is automatically set by this select-
ed PBS station is incorrect, it may not be your
local PBS station, but one from a different time
zone. Or there is a case that no channel is broad-
casting the XDS signal in your area, as shown by
no time. In these cases, you must manually enter
the correct local PBS station, or set the clock man-
ually and turn off the Auto Clock Setting feature.
MANUAL CLOCK SETTING
Make sure ...
•
TV/VCR power must be turned on.
– M E N U –
TIMER PROGRAMMING
In the example below, the clock is to be set to:
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
DATE
USER'S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
SETTING TIME
TIME SEARCH
1
Press the MENU button on the
remote control.
– SETTING CLOCK –
Press the PLAY/K or STOP/L but-
B AUTO CLOCK
[ON]
ton to point to "SETTING
AUTO CLOCK CH
[AUTO]
CLOCK".
MANUAL CLOCK SET
D.S.T.
[OFF]
Then, press the F.FWD/B button.
2
Press the PLAY/K or STOP/L but-
ton to point to "MANUAL CLOCK
– SETTING CLOCK –
SET".
AUTO CLOCK
[ON]
Then, press the F.FWD/B button.
B AUTO CLOCK CH
[AUTO]
MANUAL CLOCK SET
D.S.T.
[OFF]
3
Press the PLAY/K or STOP/L but-
ton until your desired month
appears. (Example: May → 05)
Then, press the F.FWD/B button.
4
Press the PLAY/K or STOP/L but-
ton until your desired day appears.
(Example: 1st → 01)
Then, press the F.FWD/B button.
- 12 -
May 1st, 2002
5:40PM
Select "SETTING CLOCK"
Select "MANUAL CLOCK SET"
Select the month
Select the day
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
AUTO CLOCK
[ON]
AUTO CLOCK CH
[AUTO]
B MANUAL CLOCK SET
D.S.T.
[OFF]
– MANUAL CLOCK SET –
MONTH DAY
YEAR
0 5 / – –
– – – – – – –
HOUR
MINUTE
– – : – –
– –
– MANUAL CLOCK SET –
MONTH DAY
YEAR
0 5 / 0 1
– – – – – – –
HOUR
MINUTE
– – : – –
– –
EN
9J27
Advertisement
Table of Contents
