InnoCigs ULTEX T80 User Manual page 74

INNOCIGS ULTEX T80 – ERROR MESSAGES & PROTECTIONS
Atomizer Low Alarm
If the resistance of the coil drops below 0.05 ohm in VW/Bypass modes or below 0.05 ohm in TC or TCR
mode, the display will show "ATOMIZER LOW."
Temperature Protection
If, in TC/TCR mode, the actual temperature of the coil has reached the set temperature, "PROTECT" will be
shown on the display. You can continue to use the device as usual.
Temperature Alarm
If the temperature of the device rises above 70°C, it will switch off automatically and "DEVICE TOO HOT"
will appear on the display. You can continue vaping after the device has cooled down.
71