InnoCigs ULTEX T80 User Manual page 67

INNOCIGS ULTEX T80 – EXPLANATIONS TO THE VAPING MODES
TCR mode (Temperature Coefficient of Resistance)
In TCR mode (M1, M2, M3), the device supports atomizer coils with nickel (Ni200), titanium (Ti) and
stainless steel (SS316) windings, with resistances between 0.05 ohms and 1.5 ohms. The temperature can
be between 100°C and 315°C (200°C and 600°F) in the TC Mode, depending on the atomizer head used.
This mode allows you to select different temperature coefficients of the wire or to operate with different
TCR values.
Please note that the resistance of the vaporizer head used must be set before it is first used in
TC/TCR mode.
64