Control Operation - U-Line UHRE518 User Manual & Service Manual

USER GUIDE

Control Operation

CONTROL FUNCTION GUIDE
FUNCTION
ON/OFF
Adjust Temperature
Toggle between º F / º C
Leave interior light on
Hide Display
Adjust light color
Enable Sabbath Mode
Disable Sabbath Mode
Showroom Mode
This unit is Star-K certified. See www.star-k.org for more details.
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
• A tone will sound for several seconds every minute
will appear in display
•
• Closed door to silence alert and reset
Control Operation
COMMAND
Press and release
Press or and release
Hold and for 5 seconds
Press and release to leave interior
light on for 12 hours; press again to
deactivate
Hold and press
While holding press and release
to scroll through lighting options
Press and hold for 5 seconds and
release
Press and release
Hold and for 5 seconds
NOTES
Unit will immediately turn On or OFF
When the display is flashing, press
adjust the set point temperature. Note: temperature
displayed is the actual temperature inside unit
The display will change units
After 12 hours, factory default is restored; light will
turn on when door is open
Display will turn off when door is closed. Unit will
continue to operate. Repeat command to turn on
display
Option Open Door
00
01
02
Light will be set at full intensity when door is open,
and 50% intensity when door is closed.
The o F / o C symbol will flash briefly after 5 seconds.
Interior light and display will go dark and remain so
until user resets mode - unit continues to operate
Display and interior light return to normal operation
The º F / º C symbol will flash. Display will be lit and
interior light will function. Unit will not cool. Repeat
command to return to normal operation
16
u-line.com
or to
Closed Door
White White
Blue Blue
White Blue