Download Print this page

Advertisement

Quick Links

USER GUIDE & SERVICE MANUAL
5 Class
UHRE524
24" Refrigerator

Advertisement

loading
Need help?

Need help?

Do you have a question about the UHRE524 and is the answer not in the manual?

Questions and answers

Summary of Contents for U-Line UHRE524

  • Page 1 USER GUIDE & SERVICE MANUAL 5 Class UHRE524 24” Refrigerator ● ●...
  • Page 2 USER GUIDE & SERVICE MANUAL u-line.com Table of Contents Installation Integrated Panel Dimensions Integrated Panel Installation...
  • Page 3 ® to preserve the right product, in the right place, at the right temperature. Since 2014, U-Line has been part of the Middleby family of brands. All products are designed, engineered, and assembled in Milwaukee, Wisconsin, USA, and select products are available worldwide.
  • Page 4 USER GUIDE u-line.com Integrated Panel Dimensions Integrated Panel Dimensions Metric measurements rounded and optimized. 3/4" BACK SURFACE MUST HAVE AMPLE FLAT SURFACE (20 mm) TO MOUNT OVERLAY PANEL FLAT AND WITHOUT INTEGRATED PANEL INTERFERENCE 23-1/2" NOTICE (595 mm) Due to differences in surrounding cabinetry the panel may not perfectly align with door.
  • Page 5 USER GUIDE u-line.com HANDLELESS INTEGRATED DOOR PANEL 3. Prepare the insert(s) that will back up the handleless design. Wooden Insert – Cut 1/8" (3 mm) thick The following procedure is designed to provide a finished, wooden insert(s) to the dimensions below.
  • Page 6 USER GUIDE u-line.com Handleless Integrated Panel Dimensions 1/8" (3 mm) Top Design 1/4" (6 mm) 7/8" (22 mm) Ref. 2-3/8" R 5/8" (60 mm) (R16 mm) 23-1/2" (595 mm) 2-3/4" (70 mm) Insert Notch 2-3/4" (70 mm) Wooden Insert Notch Depth: 1/8" (3 mm) Top Detail 28-13/16"...
  • Page 7 USER GUIDE u-line.com EXTENDED INTEGRATED PANEL 3. Optional: Install handles and hardware. NOTICE Due to differences in surrounding cabinetry the NOTICE panel may not perfectly align with door. The The door panel must not weigh more than 20 lbs procedure below is designed to provide a (10 kg).
  • Page 8 If you would like to cover the grille with an integrated BACK SURFACE MUST HAVE AMPLE FLAT SURFACE (20 mm) TO MOUNT OVERLAY PANEL FLAT AND WITHOUT panel, purchase U-Line’s adjustable grille accessories. INTERFERENCE 23-1/2" 24” - Sales Accessory: ULAGRILLE24...
  • Page 9 11.Remove clamps from door. panel to door using Clamp clamps. A robust tape may also be NOTICE used. U-Line If panel requires additional adjustment after recommends the removing clamps, slightly loosen each screw and use of bar clamps Door/Drawer adjust panel as necessary. Tighten screws upon to secure the panel completion.