Setting Up The Device - Medion AutoXS MD 19161 User Manual

Safety information
The device must not be immersed in water or other liquids or held
under running water because this can result in an electric shock.
− Switch off the device at the power point and pull out the plug:
– if you are cleaning the device
– if the device has become damp or wet
– if it is not being supervised
– if you are no longer using the device.
− Avoid contact with water or other liquids. Keep the device, the
power cord and the plug away from basins, sinks or similar.
− Do not place any objects fi lled with liquid, e.g. vases or drinks,
on or near the device.
− Never touch the device or the power cord with wet hands.
− Only use the device indoors. Never operate the device outside.

Setting up the device

− Place the device on a stable, level and well-ventilated surface.
− Do not place the device on the edge of a table because it could
tip over and fall.
− Make sure that the power cord does not become a tripping
hazard and do not use an extension cord.
− Only use the device at ambient temperatures of 0°C–40°C.
− The device must not be exposed to strong, direct sunlight for
prolonged periods.
− Do not expose the charger to the effects of prolonged
temperatures over 40°C. At high temperatures, the power
output of the charger reduces automatically.
− Do not cover the charger because it may otherwise heat up and
this can cause damage.
14