Page 2
SET UP INSTRUCTION 1. Tilt the Timpani back onto its side, until it is standing on its rear leg feet (Fig. 2) fig 1. fig 2. 2. Pull the knob to unlock the front leg. Turn the leg to its playing (arrow fig 3) position Pull the leg, against slight resistance, until it automatically locks.
Page 3
Place the timpani upright and pull handle 2 down to unlock the (using your hand or foot) rear leg. fig 6. fig 7. Unfold the rear leg until it automatically clicks into position. fig 8.
Page 4
MAINTENANCE & PROTECTION When not in use, release the tension on the timpani head to the minimum. fig 9. fig 10. When not in use, the timpani should be covered to protect it from dust. fig 11. When moving or transporting, lift the timpani by the legs. Lifting the timpani by the tension rim may affect tuning performance.
Page 5
When tuning or installing the timpani head, position the pedal at the lowest note and turn the tuning screws, by an equal number of rotations, in the order specified below. Once the head is tuned to its specific note, continue to observe the order for tuning and fine tune by checking that the pitch is equal in all six tuning positions.
Need help?
Do you have a question about the Prophonic Series and is the answer not in the manual?
Questions and answers