Before Operating - Sharp Healsio KN-H24INA Operation Manual

BEFORE OPERATING

■CLOCK SETTING
This appliance has a 24 hour clock.
The clock works by the internal battery when the power plug is
disconnected from an outlet.
Make sure the displayed time is correct when setting the timer.
* Suppose you want to set the present time of day 10:00.
1
Insert the inlet plug in the socket on the main unit, then plug the appliance into an outlet.
[STIR] and [WATERLESS] will disappear, and the ENTER button
2
Press and hold for four seconds until
a short beep sounds.
3
Set the time of day.
Keep the button pressed to fast forward.
4
Con rm the setting.
■SOUND SETTING
You can disable the sound when the display shows the time of day.
Before operating, insert the inlet plug in the socket of the main unit, then plug the appliance into an outlet.
To disable the sound, press and hold the TIMER button for four seconds until two audible signals sound.
To restore the sound, press and hold the TIMER button for four seconds until an audible signal sounds.
NOTE : The sounds for noti cation during the cooking or error cannot be disabled.
en-8
[The display when working
by the internal battery]
will ash on and off.
The time will
ash on and off.
The time of day
will stop ashing.