Control Panel/Display - Sharp Healsio KN-H24INA Operation Manual

CONTROL PANEL/DISPLAY

■Control panel
7 cooking categories
It is possible to choose automatic or manual
cooking from each category. See the Menu
book and select the menu number.
MENU / ENTER buttons
Use when selecting the menu, cooking
time and other settings.
Pressing the
ENTER
the selected menu number is shown on the
display.
REHEAT button
TIMER button
KEEP WARM / CANCEL button
START / STOP button
NOTE: A reminder sound beeps when you do not operate for 30 seconds.
■Display
Automatic cooking.
Manual cooking.
Displayed when the menu item
using the stirring unit.
Heating (cooking) is in operation.
Displayed when for waterless menu.
Displayed when setting the
temperature for [6] FERMENT
button during cooking,
Use to reheat.
Use for food to be ready at a preset time.
The timer can be set up to 12 hours beforehand. Consult
the Menu book for suitable dishes for using the timer.
(Timer can be used if the TIMER button light blinks during menu selection)
•Use this button to cancel the operation. If pressing this
button during operation, heating stops.
•Use this button to keep food warm.
The light turns ON during Keep Warm.
Keep Warm is automatically turned off after 12 hours.
•Use to start the appliance.
•Use to pause the appliance during operation.
en-7
Display
Displayed for 3 minutes after cooking is
complete. Cooking time can be extended.
Blinks during cooking when it is time to
add ingredients.
Displayed when pre-set timer is in use.
The factory default setting is
(TIMER 1)
6AM (TIMER 1) or 6PM (TIMER 2).
(TIMER 2)
Displayed the estimated time remaining.
When the remaining time is xed,
the indicator disappears and the exact time
remaining is displayed.
, ,