Husqvarna 326AI25 Operator's Manual page 30

If the muffler on your machine is fitted with a spark
arrestor screen this must be cleaned regularly. A blocked
screen will cause the engine to overheat and may lead to
serious damage.
WARNING! Mufflers fitted with catalytic
!
converters get very hot during use and
remain so for some time after stopping.
This also applies at idle speed. Contact
can result in burns to the skin.
Remember the risk of fire!
WARNING! The inside of the muffler
!
contain chemicals that may be
carcinogenic. Avoid contact with these
elements in the event of a damaged
muffler.
WARNING! Bear in mind that: The
!
exhaust fumes from the engine are hot
and may contain sparks which can start
a fire. Never start the machine indoors or
near combustible material!
Cutters
Ensure that the cutters are securely attached.
When the blade is manufactured it is sharpened using an
advanced method. This means that the blade cannot be
re-sharpened using conventional methods. Worn blades
must be replaced with new ones to ensure your machine
works satisfactorily.
30 – English
GENERAL SAFETY PRECAUTIONS
Transport guard
The transport guard (A) is intended to protect against any
part of the body coming into contact with the cutting
edges (B).
B
A
Regularly check that the transport guard is not damaged.
Replace the transport guard if it is damaged.