Connecting The Power Cable - Sylvania SRPD442 Owner's Manual

C
ONNECTING THE POWER CABLE
Connect the power cable to the plasma display after connecting the input terminals.
A C I N
1
Connect the power cable to the plasma display
first.
2
Connect the power cable to an AC outlet.
24
1
2
# CAUTION
• Do not connect the power cable to a power
supply outside the indicated voltage of the
plasma display (AC 120V). Connecting the
power cable to a power supply outside of this
range may result in fire or electrical shocks.
• Always use the power cable included with the
plasma display. Do not use any other cable.
For safety, make sure to always connect the
power cable to a three pronged AC outlet.