Connecting Devices To The Component Input Terminals; Component 1 Signal (Y, Cb, Cr) Connection (Best Signal Transfer); Component 2 Signal (Y, Pb, Pr) Connection (Best Signal Transfer) - Sylvania SRPD442 Owner's Manual

EXTERNAL INPUT TERMINALS

CONNECTING DEVICES TO THE COMPONENT INPUT TERMINALS

Connect the output of the device to the input terminals of the plasma display as shown in the following
illustrations.
NOTE
• When connecting a 480i input signal, connect it to COMPONENT 1.
• Cables shown here are not included with the plasma display.
• Use COMPONENT 2 for 480i, 1080i (interlaced), 480p, 720p (progressive) video signals.

Component 1 Signal (Y, Cb, Cr) Connection (Best Signal Transfer)

480i (interlaced) signals can be connected to Component 1.
(Example: DVD Player)
R L Y C
B

Component 2 Signal (Y, Pb, Pr) Connection (Best Signal Transfer)

480i, 480p (progressive), 1080i, and 720p (progressive) signals can be connected to Component 2.
NOTE
You will select TV channels with the box that will be seen on the plasma display.
Set Top Box for DTV)
(Example:
R L Y
22
C
R
3×RCA
video cables
2×RCA
audio cables
Antenna, cable,
satellite signal
COMPONENT 1
P P
B R
COMPONENT 2
AUDIO
2×RCA audio cables
Y, Cb, Cr
AUDIO
AUDIO
R L
COMPONENT 1
COMPONENT 2
R L
AUDIO
R L Y Cb Cr
R L Y Pb Pr
Y Pb Pr
Y Cb Cr
Y Pb Pr