Attaching A Wall Mount Bracket (Sold Separately) - Sylvania LD195SL8 A Owner's Manual

P
REPARATION
[PC Connection]
This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a computer monitor.
e.g.)
VGA cable should be
with ferrite core.
personal computer
The following signals can be displayed:
Format
VGA
SVGA
WVGA
XGA
Other formats or non-standard signals will not be displayed correctly.
Note:
• Please purchase the VGA cable that has a ferrite core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.

Attaching a Wall Mount Bracket (sold separately)

The following is a description of the method for attaching a wall mount to this unit.
When performing this operation, refer to the manual accompanying the wall mount kit.
#
CAUTION
• Any damage caused by incorrectly attempting to mount this unit is
not covered under the terms of the manufacturers warranty.
• This unit may be used only with VM1b manufactured by SANUS SYSTEMS.
• Use with other wall mounts may result in instability causing possible injury.
* 1 indicates the position of the screw holes on this unit.
12
EN
Resolution V. Frequency
640 x 480 60Hz
800 x 600 60Hz
848 x 480 60Hz
1024 x 768 60Hz
1
rear of this unit
VGA cable
mini-plug audio cable
Format Resolution
WXGA 1280 x 720
1280 x 768
1360 x 768
BOIS
WXGA+ 1440 x 900
You need the following wall mount kit for this unit.
Flat panel TV wall mount
Model number: VM1b
For more information,
please visit SANUS SYSTEMS website at www.sanus.com
1
Spread a thick and soft cloth over a table. Place the
main unit face down onto it. Make sure not to damage
the screen.
Note:
• Make sure to use a table which can support the weight of this
unit and is larger than this unit.
• Make sure the table is in a stable location.
2
Attach the monitor mount to this unit using the
M4 screws included with the wall mount kit.
Note:
• Only use the screw holes indicated by
unit.
• For instructions on how to attach the monitor mount, refer to
the manual accompanying the wall mount kit.
3
Attach this unit to the wall.
Note:
• Refer to the manual accompanying the wall mount kit when
securing this unit to the wall.
rear of this unit
V. Frequency
60Hz
60Hz
60Hz
720 x 400 70Hz
60Hz
for mounting this
1