Folding & Unfolding The Treadmill; Setup Options - JLL S300 Instruction Manual

FOLDING & UNFOLDING THE TREADMILL
To fold: Hold the end of the running deck, by the
side frames/ rails, and lift it until the machine gets
an upright position and you hear a click from the
hydraulic cylinder.
To unfold: Press the hydraulic cylinder with your
foot. Push the running deck down, holding it by the
side frames. The running deck will go down slowly
thanks to the hydraulic system.
SET UP OPTIONS
Use the following instructions to set up the units settings.
1. Insert the safety key into the corresponding socket.
2. Without anyone on the treadmill, plug in the power cable.
3. Switch on the treadmill. The power switch is under the front end of the machine.
The LCD display will light up and all the figures in the window will go to ZERO (0).
4. Introduce the weight that you can see flashing on the right side of the display using
the SPEED buttons.
5. Press the START button and the treadmill will start at 0.3 km/h.
6. Press the + and - button to increase or decrease the speed.
7. Press the UP and DOWN button to increase or decrease the incline.
8. Press the STOP button twice to stop the machine and clear the data.
Time Display Range
Distance Range
Pulse Display Range
Calorie Display Range
To play music from a USB flash drive you should have all music files in MP3 format in a
folder titled 'MUSIC' and insert it into the USB port.
On the treadmill press PLAY/PAUSE to play the music. Change the track with
SOUND-/LAST and SOUND+/NEXT buttons. To adjust the volume, press and hold
SOUND-/LAST or SOUND+/NEXT buttons.
NOTE: Music needs to be controlled through the device when connected via AUX.
12
0:00 - 99:59
0 - 9.999 km
50 - 230 ppm
0 - 999 Kcal
Speed Range
Incline Range
Programs
Max. User Weight
0.3 - 16 km/h (0.18 - 10 mph)
20 Levels
15
120kg, 18.9 St or 264 lb.